Bedienungsanleitung Leica S2 (Seite 58 von 89) (Englisch)

585257

Zoom out

Zoom in

Vorherige Seite

1/89

Nächste Seite

54 / Installing firmware updates / HDMI slide show

Installing firmware updates

Leica is constantly working on developing and optimizing its

products. As digital cameras have many functions that are con-

trolled electronically, some of these improvements and en -

hancements to the functions can be installed on the camera at

a later date.

To do this, Leica provides firmware updates at irregular inter-

vals, which you can easily download from our homepage to your

camera yourself:

1. Format a memory card in your LEICA S2.

2. Turn off the camera and insert the card into an SD/SDHC

card reader - either integrated or connected to your com -

puter. (A reader is required for Firmware updates).

3. Download the Firmware file from the Leica S2 site using the

„UPDATES“ link.

4. Save the file s2-X_xxx.upd at the top level of the card's folder

structure. X_xxx stands for the relevant version.

5. Remove the card properly from your card reader, insert the

card into the camera and close the door. Turn on the camera

using the main switch.

6. Confirm the prompt that appears in the monitor as to wheth -

er you want to update the Firmware on the camera to version

X.xxx.

The update process takes around 180 s. You will then be promp-

ted to restart the camera using the main switch.

7. 1.Turn the camera off and back on again.

Note:

If the battery does not have sufficient charge, you will see a

corresponding warning message.

HDMI slide show

With the LEICA S2 you can view the saved pictures at any size

and in excellent quality via an HDMI cable connection using

external playback equipment.

Setting the function

1. In the SETUP section of the menu (see p. 13/22), select

HDMI (5.28),

2. first select Resolution in the submenu, and

3. select the required format or the automatic setting.

Note:

For optimum playback quality, you should select 1080p.

4. In the first submenu select Slideshow.

5. Then select Select Images in the next submenu that appears.

• The image field shows

– the 4 fields 4.5.1 - All, 4.5.2 - BACK, 4.5.3 – Select ALL

and 4.5.4 – OK for the button functions valid in this situa-

tion

– the 2 fields 4.5.5 - Remove? and 4.5.6 - Single for the cur-

rently active functions, and

– if applicable the symbol (4.5.7) for a picture already se -

lected.

To select only one picture

6. Press the OK button.

• The symbol 4.5.7 appears in the monitor.

To select all pictures

6. Press button 1.24, and

• The entries in fields 4.5.1 and 4.5.6 change.

7. Confirm your selection with the OK button.

• The LED 1.19 flashes during the processing time and the

symbol 4.5.7 then appears in the monitor.

Notes:

The BACK button takes you back to step 4.

To undo a selection

6. Press button 4.5.3

• The entries in fields 4.5.5 and 4.5.3 change.

7. The subsequent procedure is exactly the same as that

described above for selecting pictures.

• The symbol 4.5.7 disappears from the relevant pictures.

8. In the first submenu select Duration, and

9. select the required time, or Manual if you want to change

pictures yourself.

10. Finally, to start the slideshow select Start Show in the first

submenu.

• END appears in field 4.5.3, BACK in field 4.5.3, NEXT in

field 4.5.4, along with an indication that the slideshow is

running.

11. Other pictures can be selected

- using the BACK and NEXT buttons,

- or using the click wheel (1.18) just as when viewing

pictures on the monitor.

Note:

Even if the pictures are set to change automatically after a spe-

cified time, you can call up the previous/next picture manually

at any time.

12. The slideshow can be stopped at any time by pressing the

END button.

Notes:

• If the Auto Power Off function is activated (see p. 26), a

slide show in progress is stopped after the set time.

• During a slide show, you can take a new picture at any time by

fully pressing the shutter release buttonto the 3

pressure

point (see p. 32).

Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 54

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica S2 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica S2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info