Bedienungsanleitung Leica V-LUX 1 (Seite 50 von 145) (Englisch)

102564

Zoom out

Zoom in

Vorherige Seite

1/145

Nächste Seite

Advanced

2 Press [MENU/SET] to finish.

• You can adjust from [L2 EV] to [K2EV]

in steps of [1/3 EV].

• When the flash output is adjusted, the

flash output value appears on the upper

left of the screen.

• The flash output setting is memorized

even if the camera is turned off.

• The flash output cannot be adjusted in

the following cases:

– In the auto mode [ ]

– In the motion picture mode [ ]

– In [SCENERY], [NIGHT SCENERY],

[FIREWORKS], [STARRY SKY] or

[HIGH SENS.] in scene mode

• When [DIREC. EX. COMP.] (P93) in the

[REC] mode menu is set to [ON], the

flash output can be adjusted directly

using the front dial or rear dial.

• Do not look directly at the flash at

close range when it is activated.

• Do not bring the flash too close to

objects or close the flash while it is

activated. The objects may be

discolored by its heat or light.

• Do not cover the flash reflector with

your fingers or other objects.

• If you press the shutter button halfway

when the flash is activated, the flash icon

turns red.

• When the jitter alert appears, we

recommend using a tripod.

• When you take a picture beyond the

available flash range, the exposure may

not be adjusted properly and the picture

may become bright or dark.

• When taking a picture with the flash, the

white balance is automatically adjusted

(except for [ ], [ ]). However, the

white balance may not be properly

adjusted if the flash level is insufficient.

(P83)

• When the shutter speed is fast, the flash

effect may not be sufficient.

• If you repeat taking a picture, it may not

actually be taken even if the flash is

activated. Take a picture after the access

indication disappears.

• When the flash is being charged, the flash

icon flashes red, and you cannot take a

picture even when you press the shutter

button fully.

• When taking a picture with the flash,

we recommend removing the lens

hood. In some cases it may not allow

the scene to be illuminated properly.

• Do not close the flash soon after the flash

is fired prior to taking pictures due to

AUTO/Red-eye reduction etc. It causes a

malfunction.

• The red-eye reduction effect differs

between people. Also, if the subject was

far away from the camera or was not

looking at the first flash, the effect may not

be evident.

• When using a conversion lens (optional)

or a close up lens (optional), the built-in

flash setting is fixed to Forced OFF [ ].

• When you set continuous mode or auto

bracket, only 1 picture is recorded for

every flash activated.

• When you attach an external flash, it takes

priority over the built-in flash. Refer to P99

for the external flash.

• When a dedicated flash (optional) is used,

the flash output can be adjusted and the

flash settings by picture-taking mode can

be used.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica V-LUX 1 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica V-LUX 1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info