570768
21
Zoom out
Zoom in
Vorherige Seite
1/27
Nächste Seite
Leitz Icon Printer User Guide Troubleshooting
21
Connecting to the Wireless Network
If your wireless network does not appear in the list of available networks when running the Wi-Fi Setup Wizard from the
Leitz Icon Control Panel (see Connecting the Printer Using Your Wireless Network on page 8), check for the following:
A Wi-Fi router supports many channels. Although parts of the world support channels 12 and 13, the Leitz Icon printer
supports only channels 1-11. Go to the Wireless settings for your router and verify that your router is not set to use
channel 12 or 13. If it is, change the settings to use a channel between 1 and 11. Note that all other devices on the
network will automatically adapt to this change without needing further setup.
If the initial wireless connection is made, but is then lost, check for the following:
The default setting for some routers is to disconnect devices after a certain period of time.
Go to the setup menu for your router and disable the function for disconnection passive devices or session timeout.
This setting may have a different name, depending on the type of router you are using.
Printing Labels
If you are having trouble printing, check that the print button in the software is green.
If the print button is not green, the software is unable to communicate with the printer; check for the following:
Make sure power is connected to the printer.
Make sure the correct printer is selected in the printer drop-down list.
An old print job may be blocking the print spooler. Check the status of your printer in your Windows or Mac printer
settings.
If the printer is connected using the USB cable, make sure the cable is connected properly. See Connecting the
Printer Using USB on page 7 for more information.
If the printer is connected through your wireless network, look for the printer ID in you list of available networks. If you
see your printer ID, the printer is no longer connected to your wireless network and must be reconnected. In most
cases, the printer will automatically reconnect if you unplug the printer power, and then plug it in again. If cycling the
printer power does not cause the printer to reconnect, then you must reconnect it. See Connecting the Printer Using
Your Wireless Network on page 8 for more information.
If the printer is connected using Access Point (Soft AP) Mode, make sure your computer is connected to the wireless
network indicated by your printer ID. See Connecting the Printer Using Access Point (Soft AP) Mode on page 11 for
more information.
Make sure the printer driver is configured correctly for your printer. See Adding the Printer to Your Computer and
Installing the Printer Driver on page 9 for more information.
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

leitz-icon

Suche zurücksetzen

  • Guten Tag
    meinLeitz Icon Eikettendrucker funktioniert nicht mehr. Vorne rechtes blinken die beiden Lichter für W-Lan und Einschaltknopf alternierend hin und her. Was kann ich tun? Eingereicht am 17-4-2022 11:09

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Leitz Icon wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Leitz Icon

Leitz Icon Bedienungsanleitung - Deutsch - 29 seiten

Leitz Icon Bedienungsanleitung - Holländisch - 28 seiten

Leitz Icon Bedienungsanleitung - Französisch, Spanisch - 73 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info