Bedienungsanleitung Leitz TruSens Z-2000 (Seite 3 von 11) (Englisch)

792716

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

SAFETY INFORMATION

PLEASE READ AND SAVE THESE INSTRUCTIONS

This appliance has a polarized plug (one blade is wider

than the other). To reduce the risk of electric shock,

this plug is intended to ﬁt in a polarized outlet only one

way. If the plug does not ﬁt fully in the outlet, reverse

the plug. If it still does not ﬁt, contact a qualiﬁed

electrician. Do not attempt to defeat this safety feature.

Unplug or disconnect the appliance from the power

supply before replacing ﬁlters or UV bulb, or when

appliance is not in use.

WARNING: To reduce the risk of ﬁre or electric shock,

do not use this fan with any solid-state speed control

device.

Do not operate any puriﬁer with a damaged cord or

plug, or if the wall socket is loose.

Do not run cord under carpeting, throw rugs, runners,

or similar coverings. Do not run cord under furniture

or appliances. Arrange cord away from traﬃc area and

where it will not be tripped over.

WARNING: Skin or eye damage may result from

directly viewing the light produced by the bulb in this

apparatus. Always disconnect power before replacing

or servicing. Replace bulb with UVLZ2000-01,

Manufactured by ACCO Brands.

• Remove all packaging, including the ﬁlter bag,

before use.

• Appliances that are obviously damaged must not be

operated.

• This appliance must only be connected to a wall

socket outlet matching the supply plug type and

rating stated on the rating plate.

• Locate air puriﬁer near the outlet wall socket and do

not use extension cords.

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision

or instruction concerning use of the appliance in a

safe way and understand the hazards involved.

• Children shall not play with the appliance.

• Replace the UV bulb with the models speciﬁed within

this manual.

• Do not attempt to service or repair this product

yourself.

• Only use the puriﬁer and SensorPod™ with the

power cable provided.

• Only clean this machine with a damp cloth, do not

use solvents or bleach.

• Ensure appliance is always placed on ﬁrm level

surface before operation.

• Do not block or obstruct the air intake or outlet vents.

• Do not insert ﬁngers or other items into the air intake

or outlet vents.

• When the air puriﬁer is in standby mode the

SensorPod is still transmitting a signal/data.

Z-2000: FCC ID: GV3-18Z2000 IC: 6128A-18Z2000

Sensor: FCC ID: GV3-18SP001 IC: 6128A-18SP001

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and

(2) this device must accept any interference

received, including interference that may cause

undesired operation.

Any Changes or modiﬁcations not expressly approved

by the party responsible for compliance could void the

user’s authority to operate the equipment.

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to

radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause harmful interference to radio or television

reception, which can be determined by turning the

equipment oﬀ and on, the user is encouraged to

try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the

equipment and receiver.

Connect the equipment into an outlet on a

circuit diﬀerent from that to which the receiver

is connected.

Consult the dealer or an experienced radio/

TV technician for help.

FCC RF Radiation Exposure Statement: This equipment

should be installed and operated with minimum

distance of 20cm between the radiator and all

persons.

This device contains licence-exempt transmitter(s)/

receiver(s) that comply with Innovation, Science and

Economic Development Canada’s licence-exempt

RSS(s). Operation is subject to the following two

conditions:

(1) This device may not cause interference.

( 2) This device must accept any interference,

including interference that may cause undesired

operation of the device.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leitz TruSens Z-2000 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leitz TruSens Z-2000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info