Bedienungsanleitung Lenco APD-100 (Seite 8 von 61) (Englisch)

481615

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

(3) Press and hold the POWER button from the MAP Base unit few seconds then release the

button to turn the unit on. The Power LED indicator lights on.

(4) The unit will start up. During the start up process, the TV displays an “Android” icon.

(5) After the start up process, the HOME screen displays.

(6) (a) In the case of the MAP Base unit is connected to a HDMI input of a TV set, press the

HDMI button from the remote control to select HDMI as an output source.

(b) In the case of the MAP Base unit is connected to a composite video input of a TV set,

press the COMPOSITE button from the remote control to select Composite video as an

output source.

Note: During the start up process, the unit will not respond to the HDMI or COMPOSITE

button from the remote control. Please wait for around 1 minute or until the HOME screen

displayed then press the HDMI or COMPOSITE button to select the desired output

source, if necessary.

(7) (a) If the accompany router “MAP” is operated :

The MAP Base unit will automatically connect to it. User may skip to step (8) below.

(b) If other router has to be operated:

(i) At the HOME screen ----- Press the MENU button from the remote control or press

the middle button of the mouse. The menu bar displays at the bottom of the TV screen.

Select the item [Settings] then confirm selection. The [Settings] screen displays.

(ii) At the [Settings] screen ----- Select item [Wireless & networks] and confirm

selection. The [wireless & network settings] screen displays.

(iii) At the [wireless & network settings] screen ----- Select item [Wi-Fi settings] and

confirm selection. The [Wi-Fi settings] screen displays.

(iv) At the [Wi-Fi settings] screen ----- Check the box at the item [Wi-Fi].

A list of Wi-Fi router device name displays. Select the desired router device. A dialog

box with the selected router device name will pop up and prompt for the selected

router’s log-in password.

(v) From the dialog box ----- Select the password entering field. Press the ENTER

button from the remote control or click the Left mouse button, an on screen keyboard

will pop up. Move the mouse cursor to the keyboard and select the password characters.

After entered the password, move the mouse cursor to the [Connect] button and Left

click the mouse button to confirm the router connection with the MAP Base unit. The

[Wi-Fi Settings] screen will display again.

(vi) At the [Wi-Fi Settings] screen ----- Item [Wi-Fi] shows the router name connected.

Also, from the router device list, under the selected router device name, its status

will be changed to “connected” as well.

Press the HOME button from the remote control and jump to Home screen.

If the MAP Base paired with the Wi-Fi Router before, each time to power on the Base unit,

it will search the previously paired router and connect it automatically. User may proceed

to step (8) below.

(8) Now the MAP Base unit is paired with the Wi-Fi router and the system is ready to operate.

Note: In the case of step (1) above, the router has not been turned on and after step (3) & (4) the

TV screen will pop up a [No Local Network] dialog box which prompt for the Wi-Fi connection. You

can implement following steps.

(a) Turn on the desired router.

(b) From the [No Local Network] dialog box ----- Select and confirm the item [Launch

Network Settings]. The [Wi-Fi Settings] screen displays.

complete the pairing. Or, If the accompany router “MAP” is turned on, with

checked the box at the item [Wi-Fi], the Base unit will pair with it automatically.

Setting HDMI on MAP Base unit and TV set

The MAP Base unit supports following HDMI source (output) video format timings:

1920 x 1080p @ 60Hz 1920 x 1080i @ 60Hz 1280 x 720p @ 60Hz

720 x 480p @ 60Hz 640 x 480p @ 60Hz

APD-100 5L IB.pdf 8APD-100 5L IB.pdf 8 2012-5-31 14:46:152012-5-31 14:46:15

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenco APD-100 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info