694884
7
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
B. About the rechargeable Baery
This Bluetooth Speaker has an internal, non–user-replaceable baery. For
the best results, the rst me you use this Bluetooth Speaker, let it
charge for about 6 ~7 hours or unl the charging LED indicator light goes
from a red light to ‘o’ which shows you the baery is fully charged.
To maintain the baery life and performance, if the speaker isn’t used for
a while, the baery might need to be recharged. Charge the baery at
least once every month.
To charge the rechargeable baery:
1. Connect the Bluetooth Speaker’s “Micro USB socket (2)” with the USB
power charger which able to provides output at least DC 5V 1A for
charge connecon via the original USB cable (supplied).
2. The “Charge (10)” LED will turn On in red, the baery is in charging.
3. The “Charge (10)” LED will turn Off when the rechargeable baery is
fully charged.
4. Disconnect the USB cable when it is done.
C. Power ON and Pairing
D. Disconnect from paired device
1. Slide “ON/OFF switch (1)” on the device to ON ll to listen “DUDU”,
the Bluetooth searching are open;
2. “Bluetooth (10)” LED is fast blinking in blue.
3. Then, acvate the Bluetooth funcon in your Bluetooth device (such
as Mobile Phone); the device will enter to Bluetooth searching mode
automacally , if not , tap the relate selecon to manually enter to
searching mode. ( refer to your device’s manual when necessary )
4. Your Bluetooth device should show “BT-191” in list, and then select it
for pairing . Waing for some seconds and you will see connected
message as shown on your mobile device. If pairing is successful, a
tone will sound “DU” and the “Bluetooth (10)” LED will keep lighng
blue slowly.
5. Now, you can start to music play from the mobile device by its music
player program.
6. Slide “ON/OFF switch (1)” to OFF when it is not in use.
1. To disconnect with paired device and for beer result, turn Off the
Bluetooth Speaker by Slide the “ON/OFF switch (1)” to OFF directly;
2. Or, you can choose “Disconnect” from Bluetooth paired device list on
your mobile device;
3. In this case; the Bluetooth Speaker will turn back into “Searching/Pairing
mode in seconds, the “Bluetooth (10)” LED will turn to fast blinking
6
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lenco BT-191 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info