694890
8
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
3. In this case, the Bluetooth Speaker will turn back into the
“Searching/Pairing” mode in a few seconds, and the “Bluetooth (7)”
LED will turn to slowly blinking in blue.
4. Now, you can pair another mobile device or power O the Bluetooth
Speaker if you want.
5. Noce: Disconnecng Bluetooth for a long me when the unit is not
turned o, it will be reconnected when you come back.
E. Auto reconnect with paired device
1. Every me you turn On the Bluetooth Speakers power; it will rstly
search for the mobile device that has been paired previously and that
is sll in the speakers record;
2. The Bluetooth Speaker will reconnect this mobile device as priority if
it is in the Bluetooth searching device mode and within the
connecon range.
3. If no device has been found in a few seconds, then the Bluetooth
Speaker will automacally turn into the pairing mode.
4. Now you can pair a new mobile device.
F. Interconnecon Bluetooth pairing
1. Press and hold the / (4) and >/V+(6) at the same me, fast
blinking in blue from lighng, unl the “DU” sound is heard and the
blue light flashes slowly. Set it to be the main unit (le channel), the
LED to be flashing fast, and when a song is playing the blue light will
show a steady blue light.
2. Press and hold the / (4) and </V-(5) in the same me, fast
blinking in blue from lighng, unl the “DU” sound is heard and the
blue light flashes slowly. Set it to be the slave unit (right channel),
and the blue light will blink steadily; this steady blinking will remai
n
the same when a song is played.
3. Search your phone in the Bluetooth status unl it shows “BT-200”;
choose it and then both speakers will play music at the same me.
4. When you turn on your mobile phone the next me, there is no need
to set interconnecon again, they will match automacally.
Noce in interconnecon status:
a. The calling funcon will remain on main the unit.
b. NFC will work on main unit.
c. If you turn o one of these two speakers then both will be turned o
together; if you would like to turn them on again you have to do this
for both separately.
d. When you insert AUX in into the main unit, both units will be
disconnected from Bluetooth; when
you insert AUX in into the slave
unit, the main unit is sll working in Bluetooth. When disconnecng
the Aux in, you need to reconnect both units again for the
interconnecon.
7
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lenco BT-200 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info