Bedienungsanleitung Lenco bte 010 (Seite 1 von 2) (Englisch)

232904

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

4. Product specification

5. About BTE-010

6.Charging Earphone

1.Built-in rechargeable Lithium battery.

2.It must take 4 hours when the first time charging.

3.Connect the charger cable to the charger connector. The Red indicator light

is displayed during charging. Charging the battery fully may take about 2

hours.

4.When the battery is fully charged, the Red indicator light will be off.

The fully charged battery has power for up to 5 hours of talking time, up to 4.5

hours of music playing time, up to 100 hours of standby time.

8. Switch on or off

1.Press and hold the multifunction key for about 3 seconds, the Blue indicator

light is displayed. This shows the earphone is power on.

2.Press and hold the multifunction key until the Red indicator light is displayed.

This shows the earphone is power off.

If your phone supports the A2DP Bluetooth profile and has a music player

feature, you can use the phone to make and receive calls, and to play music

with the headset.

1.Ensure that your phone or music device is on and the headset is off.

2.Press and hold the multifunction key for about 5 seconds until the Red

indicator light and the Blue indicator light starts to flash quickly.

3.Activate the Bluetooth feature on your phone or music player, and set it

to search for Bluetooth devices.

4.Select the headset BTE-010 from the list of founded devices on your

phone or music player.

5.Enter the passcode 0000 to pair and connect the headset to your device.

If your device does not have a keypad, it may use this passcode by default.

6.When the headset is connected to your device and is ready for use, the

Blue indicator light will flash every 2 seconds.

9. Pair the headset

7. Wearing

user's manual

1. Welcome

2. Introduction

3. Packing List

Us r m nu le

Bluetooth Hi-Fi

Stereo earphone

Charger

Manual

1.Multifunction key

with switch on/off,

Answer, End, Pair,

Play and Pause.

2.Volume + key

3.Volume - key

4.Microphone

5.Loudspeaker

6.Previous key

7.Next key

8.Charge connector

Bluetooth is a new short-distance wireless communication technology. Any

devices with Bluetooth feature, such as mobile phones, PDA, PC, headsets,

mouse, keypads, keyboards, printers and other mobile fittings, can work as

wireless devices. Designed with global standards, Bluetooth technology applies

to internationally certified ISM bandwidth. The frequency band ranging from

2.4 GHz to 2.48 GHz is divided up into 79 channels by way of frequency hopping

up to 1600 times for data transmission with a distance of 10 meters.

The manual provides instructions on how to set and operate the BTE-010 Bluetooth

headset , please read this manual carefully before use.

The accessories are subject to change for improving product

performance without prior notice. The real products prevail.

Bluetooth specification: Support V2.1+EDR with Handsfree Profile

1.5., Headset Profile 1.1 and A2DP profile 1.2. (Class II)

Standby time: 100 hours

Talking time: 5 hours

Playing music time: 4.5 hours

Distance: up to 10 meters

Weight: 16 g

Certification: CE; ROHS; REACH

BTE-010

For information and support, www.lenco.eu

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenco bte 010 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lenco bte 010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info