4. Press MODE button (7) one more to cancel Intro playback and resume normal playback.
5. Power is turned off automatically after 60 seconds, when all tracks have been played.
PROGRAM PLAY
1. Press the PLAY/PAUSE button (2) and after 8 seconds the STOP button (3).
2. Press the PROG button (6), the following will appear on the display: (001 P-01) and the 001 will
flash.
3. Press the SKIP Forward and Backward (4,5) buttons to select the desired track to be
programmed and press PROG button (6) once to confirm.
4. Repeat the step 3 to program up to 20 tracks.
5. Press PLAY/PAUSE button (2) once to start programmed playback.
6. To cancel programmed playback, press the STOP button (3) twice, when pressing STOP button (3)
once, you can restart programmed play within 30 seconds. (After stopping music play the unit
will go into standby mode after 30 seconds to save the batteries). When programmed playback
is activated ‘PROG’ will be shown on the LCD display.
NOTES:
While playing an MP3 disc, press and release the PROG button (6) to make a jump of 10 tracks
forward. Hold down the button for about 0.5 seconds to play the first track in the next folder if there
are multiple folders on disk. (The following function is active only when playing MP3 discs)
AUTO-RESUME FUNCTION
For activating auto-resume function, you need to press STOP button (3) twice. The player will be turned
off. Press play button (2) once to power on the player and resume playing at the point of previous stop.
If you press the stop button only once, the player will stop and not be powered off. If you start
playback again the player will cancel the resume function and start playing from track 01.
Please note that auto-resume function is enabled only if the device is connected to some power
source (DC cable or batteries).
ANTI-SHOCK FUNCTION
If in use, the player is likely to receive shocks or vibrations (i.e. whilst walking or in a moving vehicle).
As soon as the PLAY/PAUSE button is pressed, the ASP function is automatically activated to allow
uninterrupted playback. The ‘ESP’ indicator on the display will blink when device is in use, indicating
the ‘Electronic Skip Protection’ is activated
Should the player receive shocks for more than 40 seconds continuously in CD playback or
100 seconds in MP3 playback, the sound can mute for a very short while and will resume once the
player has stabilized from the shock.
