500669
11
Zoom out
Zoom in
Vorherige Seite
1/19
Nächste Seite
11
Storing preset stations
You can store up to 10 stations in the memory. Storing a station:
1. Press the Preset button (17) and keep it pressed until CH starts flashing. CH is
the number of the preset station, which means the number that the station will be
saved under.
2. You can browse through the CH numbers by pressing the previous button (12) or
next button (10).
3. Store a station by pressing the preset button (17).
Recalling a preset station
You can recall a preset station by pressing preset (17). Then use the Previous (12) or
Next (10) button to browse through the stored stations.
Playback from a Bluetooth® device
Through the built-in Bluetooth® receiver, music can be wirelessly streamed from an
external Bluetooth® device to the Lenco radio. Enter the Bluetooth® mode by
pressing the source button (13) until BLUE is shown on the display . The radio will
automatically try to connect to the last paired device. If pairing fails or if you want to
connect to a different Bluetooth® device, hold the pair button (11) until the the
Bluetooth® LED starts flashing. See chapter "pair & play" for instructions on how to
pair a Bluetooth® device.
Basic Operation during playback from a Bluetooth® device
Depending on the external Bluetooth® device, the following functions might not
work, not work correctly or work differently than described.
Pause playback, press the play / pause button (11) during playback to pause
playback. Press the play / pause button (11) again to resume playback.
Skip to next track, press the next button (10) during playback to skip to the next track.
Skip to previous track, press the previous button (12) during playback to skip to the
previous track.
Other functions
Using the sleep timer
This device is equipped with a sleep timer that can be used to turn off the device after
a preset amount of time has elapsed. This is useful, for example when you want to
fall asleep while listening to music. To activate the sleep timer press the Snooze /
Dimmer button (1) when the device is turned on. Once you have pressed the button,
the time in minutes will appear on the display, the time can be adjusted by repeatedly
pressing the Snooze / Dimmer button (1). The sleep timer can be set to 90, 80, 70,
60, 50, 40, 30, 20, 10 minutes. Once the desired time is shown on the display, wait 5
seconds for the device to store the time and activate the sleep timer. To disable the
sleep timer, press the Snooze / Dimmer button (1) and keep it pressed until OFF
appears on the display. It is also possible to turn the device off while using the sleep
timer by pressing the Standby/Source button (13).
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lenco CR-3306 BT wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Lenco CR-3306 BT

Lenco CR-3306 BT Bedienungsanleitung - Deutsch - 23 seiten

Lenco CR-3306 BT Bedienungsanleitung - Holländisch - 21 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info