Bedienungsanleitung Lenco cs341 (Seite 7 von 24) (Deutsch, Englisch, Holländisch, Französisch)

169063

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

OPERATION

GENERAL OPERATION

1. Switching on/off the unit

Press “ PWR ” button (22) to power on/off the unit.

2. Remove the panel

Press button(1) to Remove the panel.

3. Sound adjusting

Press SEL button (2) shortly to select the desired adjustment mode. The adjustment mode will change in the

following order: VOL---BASS---TREBLE---BALANCE---FADER.

By rotating the audio knob (2) clockwise or counter-clockwise, it is possible to adjust the sound setting.

4. LOUDNESS on/off

Press BND/LOU/ENT button (19) for 2 seconds to enable loud mode. Press it for 2 seconds again to disable this

function.

5. LIQUID CRYSTAL DISPLAY

Exhibit current frequency and activated functions on the display.

6. AUXILIARY INPUT

The unit can be connected to a portable audio player through the AUX IN jack (23) on the front panel. After finishing

the connection, you can press MOD button (20) on the front panel to switch the mode to AUX IN mode.

7. RESET FUNCTION

RESET button (24) must be activated with either a ballpoint pen or thin metal object. The RESET button has to be

activated for the following reasons:

- Initial installation of the unit when all wiring is completed.

- All the function buttons do not operate.

- Error symbol on the display.

Note: if press RESET button (24), All the memory will be lost!

RADIO OPERATION

1. SWITCHING TO RADIO MODE

Press MOD button (20) shortly to select radio mode, the radio mode appears in the display together with the

memory band and frequency.

2. SELECTING THE FREQUENCY BAND

At radio mode, press BND/LOU(ENT) button (19) shortly to select the desired band.

The reception band will change in the following order: FM1--FM2--FM3--AM1--AM2.

3. SELECTING STATION

Press

button (18) or button (4) shortly to search manual. Every time or is pressed the frequency

will change with 0,05 Mhz. Press and hold button

or for 2 seconds to scan automatically. To stop the

autoscan puch and together at the same time.

4. AUTOMATIC MEMORY STORING & PROGRAM SCANNING

- Automatic memory storing

Press AS/PS (SCH) button (21) for several seconds, the radio searches the signal strength until one cycle

search is finished. And then the 6 strongest stations are stored into the corresponding preset number button.

- Program scanning

Press AS/PS (SCH) button (21) shortly to preview all the preset stations.

OPERATION

5. MANUAL STORING A STATION

Tune to a preffered frequency and press one of the preset button(12/13/14/15/16/17) for several seconds, current

station is stored into the number button.

6. RDS (RADIO DATA SYSTEM) OPERATION

- Setting AF mode

Press AF(REG) button (6) and release immediately to switch on or off AF mode.

Whenever AF is switch on, symbol “AF” appears on the display.

Program name is displayed on receiving a RDS station.

“AF” starts blinking if the broadcasting signal getting worse. And when the signal is too bad due a frequency

change. AF will automatically switch to the new frequency.

- Regional Program Operation

Press AF(REG) button (6) for several seconds to switch on or off region mode.

Some broadcasting stations change their program from normal broadcasting to regional broadcasting for a

certain time period. When region is on, the current listening program remains unchanged. When region is off, it

allows the reception moves to the regional station.

- Using PTY to Select Program

PTY button (5) 1 time.then press preset button(12/13/14/15/16/17). You can select the program type as below:

1# button: NEWS/AFFAIR/INFORM

2# button: EDUCATIO/DRAMA/SPORT

3# button: VARIED/CULTURE/SCIENCE

4# button: ECONOMY/CHILD PR/WEATHER

5# button: PHONE IN/SOCIAL/RELIGION

6# button: TRAVEL/LEISURE/DOCUMENT

PTY button (5) 2 time.then press preset button(12/13/14/15/16/17). You can select the program type as below:

1# button: ROCK MUS/POP MUSI

2# button: LIGHT MU/EASY MUS

3# button: OTHER MU/CLASSICS

4# button: COUNTRY/JAZZ MUS

5# button: NATIONAL/OLDIES

6# button: FOLK MUS

- Listening to Traffic Announcement

TA button (3) is operated as follows:

When pressed, it is engaging whether TA mode on or off.

When TA mode, is on and a traffic announcement is transmitted:

When the unit was in CD (MP3) USB/SD mode or AUX IN mode, it will switch temporarily to radio mode.

If the volume level was under the threshold point it will be raised to the threshold point. But when changed the

volume level, which was more than the threshold point (min. TA volume level), it will be set to the last level.

When TA mode is on, TA of individual segment is turned on. When a TP station is received, TP of individual

segment is turned on. TA interruption function

The current traffic announcement is cancelled by pressing this key.

But the TA mode will not be off.

Broadcast station name data expressed in alphanumerically characters

AF: Alternative Frequencies

Frequency list of broadcasting stations transmitting the same program

TP: Traffic Program Identification

Identification data for traffic information-broadcasting station

TA: Traffic Announcement Identification

Identification data showing traffic information is being transmitted or not

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenco cs341 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info