Bedienungsanleitung Lenco DR-88 BT (Seite 10 von 71) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

601607

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

GB 10

Treble and Bass Settings

When the unit is powered on (in Bluetooth, Aux-IN, Line1, Line2, CD, DAB Radio or FM Radio mode), you can press

the BASS + / - and TREBLE + / - buttons to adjust to the desired bass and Treble level.

Listening to CD Music

CD Program Playback

This feature allows you to program up to 20 tracks for Audio CD or 30 songs for MP3 CD in a desired order.

1. With CD playback stopped, press the PROG button once from the remote control.

The LCD shows following indication:

“PGM” indicator

The program number (e.g. P01) blinks.

The Track number (e.g. T001)

The Directory (Folder) number (e.g. A01) ---- apply for MP3 disc only.

2. To select a directory number, press the FOLDER / button from the remote control (for MP3 disc only).

To select a track number, press the / button.

3. When desired track number displayed, press the PROG button to conrm entry.

4. To program up to 20 Audio CD tracks or 30 MP3 CD songs, repeat steps 2 and 3 until all desired tracks are

entered.

Or, to begin programmed playback, press the Play/Pause button, the “PGM” indicator stays on the display.

5. To cancel programmed playback, press the STOP button twice.

Note:

● If you press the / button during programmed playback, the unit will skip backward / forward to previous / next

track in the program, which is not necessarily the previous / next track on the disc.

● The CD play modes function, “ ”repeat one track and “ ” repeat all programmed track, work in the same

manner as during normal CD playback (see CD Play Modes above).

ID3 Function

This function allows users to view the song information (if any) on the track (le) that they are playing.

To enable this function:

1. During CD-MP3 playback, press the ID3 button. The information (e.g. artist name, song title) saved on the track

(le) will be shown on the LCD display.

2. To turn off the ID3 function, press the ID3 button again.

Note:

● Only applicable for recorded MP3 tracks (les) with ID3 tags.

● The unit supports ID3 tags in English characters only. It does not support any other languages.

Listening to External Audio Source

The unit provides three sets audio input connector (AUX-IN / LINE-IN 1 / LINE-IN 2).

You can connect to three different external audio sources.

1. Connect an audio cable with 3.5mm stereo plug from an auxiliary audio device to the AUX IN jack of the unit. Also

RCA type audio connector can be connected to the LINE-IN 1 and LINE-IN 2 audio input jacks.

2. Press the STANDBY button to turn on the unit.

3. To select auxiliary audio input, press the FUNCTION button from the main unit or the button LINE-IN / AUX IN

from the remote control. The “AUX-IN” / “LINE-IN 1” / “LINE-IN 2” indicator shows on display.

4. Turn on the external auxiliary audio device.

5. The volume can now be controlled through the unit.

Operate all other functions on the external device as usual.

Notes: Press the STANDBY button to turn off the unit when you nish listening.

Don’t forget to switch off the power of the external audio device as well.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenco DR-88 BT Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info