Bedienungsanleitung Lenco DVL-1954 (Seite 10 von 32) (Englisch)

527098

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

English - 53 -

Connecting the TV to a PC

For displaying your computer’s screen image on your

TV, you can connect your computer to the TV set.

Power off both computer and display before making

any connections. Use a 15-pin D-sub display cable

to connect a PC to the TV. When the connection is

made, switch to PC source. See the Input selection

section. Set the resolution that suits your viewing

requirements. Resolution information can be found

in the appendix.

PC Input

(back)

Side AV Input

PC VGA Cable

(not supplied)

PC Audio Cable

(not supplied)

Side Audio/Video

Connection Cable

(supplied)

SIDE AV

Note: You should use audio inputs of side AV

connection cable (RED & WHITE) to enable sound

connection when connecting a device to your TV by

using PC input.

Note: If you connect a PC to the TV using HDMI

connection, radio interference may occur. Therefore

this type of connection is not recommended. You

should use VGA connection instead.

Using Side AV Connectors

You can connect a range of optional equipment to your

TV using the side connectors of the TV.

When connecting a camcorder or camera , you should •

use the SIDE AV socket. To do this, you must use the

supplied video/audio connection cable. First, plug

single jack of the cable to the TV’s AV IN socket

(side). Afterwards, insert your camera cable’s (not

supplied) connectors into the plural part of the video/

audio connection cable. Colours of the connected

jacks should match. See illustration below.

Afterwards, you should switch to the • Side AV source.

See the section Input selection in the following

sections for more information.

Camera

Side AV Connection

Cable (supplied)

AV Cable

(not supplied)

Headphone

SIDE AV

To listen the TV sound from headphones, you •

should connect headphones to your TV by using the

HEADPHONE jack as illustrated above.

Connecting to a DVD Player

via HDMI

Please refer to your DVD player’s instruction book

for additional information. Power off both the TV and

the device before making any connections.

Note: Not all cables shown in the illustration are

supplied.

If your DVD player has an • HDMI socket, you can

connect via HDMI for better video and audio quality.

HDMI 1

DMHI 2

SPDIF

Coax.OUT



(notsupplied)

HDMI Cable

When you connect to DVD player as illustrated above, •

switch to the connected HDMI source. See, Input

Selection section for more information on changing

sources.

Connecting to a DVD Player

If you want to connect a DVD player to your TV, you

can use the connectors of the TV set. DVD players

may have different connectors. Please refer to your

DVD player’s instruction book for additional information.

Power off both the TV and the device before making

any connections.

Note: Cables shown in the illustration are not

supplied.

If your DVD player has an • HDMI socket, you can

connect via HDMI. When you connect to a DVD player

as illustrated below, switch to the HDMI source. See

“Input Selection” section.

DVD players can also be connected through •

COMPONENT SOCKETS. YPbPr can be used only

when you connect a device that has a YPbPr output

through the PC input with YPbPr to PC cable (YPbPr

cable is not supplied).

You may also connect through the SCART sockets. •

Use a SCART cable as shown below.

Note: These three methods of connection perform the

same function but in different levels of quality. It is

not necessary to connect by all three methods.

DVD Player

Side AV Input

Audio Cable

(Not supplied)

Side AV

Connection cable

(supplied)

ide

To RED & WHITE inputs

Audio Connection

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenco DVL-1954 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lenco DVL-1954

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info