Bedienungsanleitung Lenco DVL-1954 (Seite 24 von 32) (Englisch)

527098

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

English - 67 -

Parental Settings Menu Operation

Select an item by using “• ” or “ ” button.

Use “•

” or “ ” button to set an item.

Press• OK button to view more options.

Menu Lock: Menu lock setting enables or disables

the menu access. You can disable access to the

installation menu or the whole menu system.

Maturity Lock: When set, this option gets the maturity

information from the broadcast and if this maturity level

is disabled, disables access to the broadcast.

Child Lock: When Child Lock is set, the TV can only

be controlled by the remote control. In this case the

control panel buttons will not work. Hence, if one of

those buttons is pressed, Child Lock Is On will be

displayed on the screen when the menu screen is

not visible.

Set PIN: Deﬁnes a new PIN number. Use numeric

buttons to enter a new pin number. You will need

to enter your new pin a second time for veriﬁcation

purposes.

IMPORTANT: The factory default pin number is 0000,

if you change the pin number make sure you write it

down and keep it safe.

Timers

To view Timers menu, press MENU button and select

Settings icon by using “ ” or “ ” button. Press OK

button to view Settings menu. Use “

” or “ ” button

to highlight Timers and press OK to continue:

Setting Sleep Timer

This setting is used for setting the TV to turn off after

a certain time.

Highlight Sleep Timer by using “•

” or “ ” button.

Use “•

” or “ ” button to set. The timer can be

programmed between Off and 2.00 hours (120

minutes) in steps of 30 minutes.

Setting Programme Timers

You can set programme timers for a particular

programme using this feature.

Press “

” button to set timers on an event. Programme

timer function buttons will be displayed on the

screen.

Adding a Timer

Press • YELLOW button on the remote control to

add a timer. The following menu appears on the

screen:

Channel: Changes network type by using “

” or “ ”.

Timer Type: This feature is unavailable to be set.

Date: Enter a date using the numeric buttons.

Start: Enter a starting time using the numeric

buttons.

End: Enter an ending time using the numeric

buttons.

Duration: Displays duration between the starting and

ending time.

Repeat: Sets a timer to be repeated as Once, Daily or

Weekly. Use “

” or “ ” buttons to select an option.

Press • GREEN button to save the timer. Press RED

button to cancel.

Change/Delete:Controls parental settings on timers.

Editing a Timer

Select the timer you want to edit by pressing “• ”

or “ ” button.

Press • GREEN button. Edit Timer menu screen will

be displayed.

When ﬁnished with editing, press • GREEN button to

save. You can press MENU button to cancel.

Deleting a Timer

Select the timer you want to delete by pressing “•

” or “ ” button.

Press • RED button.

Select • YES by using “

” or “ ” buttons to delete the

timer. Select NO to cancel.

Conﬁguring Date/Time Settings

Select Date/Time in the Settings menu to conﬁgure

Date/Time settings. Press OK button.

Use “• ” or “ ” buttons to highlight Date/Time.

Date,Time,Time Settings Mode and Time Zone Setting

will be available.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenco DVL-1954 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lenco DVL-1954

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info