Bedienungsanleitung Lenco dvt 1946 (Seite 53 von 97) (Holländisch)

144457

Zoom out

Zoom in

Vorherige Seite

1/97

Nächste Seite

E13

BUILD-IN DVD PLAYER OPERATIONS

The following types of discs can be played on this unit.

Disc type and logo mark

DVD

Region Number

Region number (Regional restriction code) is built-

in to the unitand DVD video discs.Region number

“2” of DVD video discs can be used on this unit.

DVD Video Disc

DVD video discs are divided into titles, and the titles are sub-

divided into chapters.

Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3

There are the marks on some DVD video disc package.

Examples:

Audio CD Disc

Audio CD discs are divided into tracks.

Track 1 Track 2 Track 3 Track 4 Track 5

Only the above types of discs can be played on this unit.

DVD-ROM, CD-ROM, CVD, VCD, etc. cannot beplayed.

This unit can play back the DVD-R that has recorded

movie data as well. However, some DVD-Rs cannot be

played back depending on the recording conditions.

The DVD-R that has no movie data cannot be played

back.

The DVD-RW (Video mode) can be played back.

However, some DVD-RWs cannot be played back

depending on the recording conditions. The DVD-RW (VR

mode) cannot be played back.

The DVD+R/+RW can be played back. However, some

DVD+R/+RWs cannot be played back depending on the

recording conditions.

•

Title 1 Title 2

LB16:9

Multiple languages

Multi-language subtitles

Multi-angle

Multi-aspect

Region number

Closed caption

CAUTION:

Do not touch the disc door while it is moving.

Never put anything except a 5-inch (12cm) or 3-inch

(8cm)DVD (or CD) into the disc in/out slot. Foreign

objects can damage the unit.

Fingerprints and dust should be carefully wiped from

the signal surface of the disc (glossy side) with a soft

cloth. Wipe in a straight motion from the center to the

outside of the disc.

Never use chemicals such as record cleaning sprays,

antistatic sprays or ﬂ uids, benzene or thinner to clean

the discs. These chemicals will permanently damage

the plastic surface of the disc.

To remove a disc from its storage case, press down

on the center of the case and lift the disc out, holding

it carefully by the edges.

Discs should be returned to their cases after use to

protect them from dust and scratches.

To prevent warping the disc, do not expose it to

direct sunlight, high humidity or high temperatures for

extended periods of time.

Do not apply paper or write anything on either side of

the disc. Sharp writing instruments, or the inks used

in some felt-tip pens, may damage the surfaces of the

disc.

•

Handling, Storing and Cleaning Discs

Basic Playback

“ ” may appear on the TV screen during operation. This

icon means that the function is not available on the disc now.

Preparations

1. Turn on the TV and press [SOURCE] to select the input

source as "DVD",

2. Insert the disc (label facing away from you) to the disc in/

out slot (side panel) until it clicks.

The TV starts to play automatically the ﬁ rst ﬁ le/track/chapter.

Stop Playback

[CD]

Press [

] to stop the playing back disc temporarily, press

this button again to resume playback.

[DVD]

Press [

] once to stop the playing back disc temporarily.

Press [

] twice to stop the playing back disc completely.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenco dvt 1946 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info