Bedienungsanleitung Lenco LBT-225 (Seite 8 von 122) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch)

803309

Zoom out

Zoom in

Vorherige Seite

1/122

Nächste Seite

- 8 -

Note:

• If the Phono/Line switch is set at LINE position but RCA jacks connected to the stereo system’s phono input, the

sound might be distorted due to input overload and could damage your stereo system.

• If the Phono/Line switch is set at PHONO position but RCA jacks connected to the stereo system’s line input,

the volume will be very low due to lacking signal pre-amplification.

RCA Jack is not designed to be connected directly to the passive/unpowered speakers and if it does, the volume

will be very low.

GAIN SELECT switch

When playing, adjust the difference of the volume of the vinyl records. If the audio track was recorded on the vinyl

record at a quite volume, set this to HIGH to play at the appropriate volume. If the audio track was recorded on

the vinyl record at a loud volume, the sound may become distorted if you play the vinyl record with this set to

HIGH. Change the settings to be appropriate for the vinyl record.

Volume adjustment is effective for audio output when the OUTPUT SELECT switch is set to LINE, the playback

volume on BLUETOOTH connections, and the recording volume on the computer. It is ineffective for audio output

when the OUTPUT SELECT switch is set to PHONO.

Main Power Connection

The power adaptor is in the foam packing material. Unpack the power adaptor and plug the small end into the DC

power jack located at the back side of the turntable. Plug the power adaptor into your power outlet.

Operation

Turntable Operation

1. Connect the included power adapter to unit and Press the power button to power ON the turntable.

2. Remove the needle cover from the cartridge.

3. Place the slipmat on the platter and place a record on the slipmat. If using 45 RPM records, put the 45 RPM

adapter on the center spindle before placing the record on the platter.

4. Set the 33/45 RPM Selector according to the type of record. The platter starts to spinning.

5. Unlock the arm clip and set the Lift Lever to the up position.

6. Position the tonearm over the desired location (groove) on the record.

7. Move the tonearm lift lever to the down position to move the tonearm toward the record. Alternatively, place

the needle over the desired location on the record.

8. Carefully lower the tonearm on the record.

9. When you are finished playing the record, raise the tonearm, return it to rest on the arm clip, and turn the

Speed/Stop Knob to the Stop.

10. Press the power button to turn off the power.

Bluetooth Operation

This unit has a Bluetooth transmitter to send the sound to a Bluetooth speaker or headphone wirelessly.

1. Power on your Bluetooth speaker and ensure it is in pairing mode.

2. Power ON the turntable with the power button. The LED indicator will first light to RED and then will flash in

blue during Bluetooth searching of the external speaker or headphone.

Note: if you want to disable the Bluetooth searching function you can press the Power button for 3 seconds,

then the Led light indicator will light to RED.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenco LBT-225 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info