Bedienungsanleitung Lenco LED-4353 (Seite 50 von 231) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Spanisch)

793267

Zoom out

Zoom in

Vorherige Seite

1/231

Nächste Seite

English - 11 -

corresponds to your satelite system and press OK or

the Right directional button to proceed to the next step.

Depending on the country and antenna type selections

you made in the earlier steps of the initial setup

process, Load Preset List screen may be displayed

next. Highlight Load Preset List and press OK or the

Right directional button to proceed with the SatcoDX

installation. You can also skip this step by selecting

Skip option.

After selecting the antenna type and preset list



the second    screen

according to your environment. You may be able to

󰀨

antenna type and operator in the previous steps. The

󰀨

antenna type. Direct, Satellite Position or DiSEqC

options may be available. Highlight the desired satellite

option and press OK. Then select the satellite for that

option from the list of available satellites. After you

Right

directional button to proceed.

If Load Preset List option is selected in the previous

step next steps will be skipped and the preset channel

list installation will start. If the correct satellite has not

been selected for SatcoDX installation, a warning

dialogue will be displayed on the screen. The satellite/s

that can be selected will be listed. Press OK to close

the dialogue and then set the satellite accordingly.

Select Operation screen will be displayed next. Select

Scan and press OK or the Right directional button

    

Skip Scan to proceed without performing a scan and

complete the initial setup.

DVBS Scan Configure screen will be displayed

next if Scan option is selected. Following options

will be available: Scan Mode and Channels. You

can choose to perform a full scan or a network scan.

Set the Scan Mode accordingly. If you are going to

perform a network scan, make sure that you have

selected the correct transponder under the Reference

Transponder option on the second of the DVBS

Configuration Setting screens or adjusted the

Frequency, Symbol Rate (Ksym/s) and Polarisation

parameters accurately using the  option.

You may not be able to change the Scan mode setting

depending on the previous selections. If the Channels

option is set as Free encrypted channels will not be

installed. Additional options may also be available



settings according to your preferences. Once you are

done with setting the available options, press the Right

directional button to start scan while Scan Mode or

Channels is highlighted.

While the search continues you can press the Back/

Return button twice, highlight Skip Scan and press

OK or Right directional button to stop the search. The

channels that have already been found will be stored

in the channel list.

When the initial setup is completed a message will be

displayed. Press OK

You will be asked to give your consent to the

collection of your usage data. Read the text on the

screen for detailed information. Highlight Accept and

press OK to give your consent and proceed. To skip

without giving your consent, select Skip. You can

change this setting later using the Settings>Device

Preferences>Manufacturer Usage & Diagnostics

menu on the Home Screen.

Home Screen will be displayed. You can press the Exit

button on the remote or highlight the Live TV app from

the Apps row on the Home Screen and press OK to

switch to Live TV mode and watch TV channels. For

some countries, the Live TV app will be situated in the

Home tab on the Home Screen and the row with this

app will be named as Favourite Apps.

Home Screen



be connected to the Internet. Connect the TV to a

home network with a high-speed Internet connection.

You can connect your TV wirelessly or wired to your

modem/router. Refer to the Network & Internet

and Connecting to the Internet sections for further

information on how to connect your TV to the internet.

The Home menu is the centre of your TV. Press the

Home button to display Home Screen. From the

Home menu you can start any application, switch to a

TV channel, watch a movie or switch to a connected

device. Depending on your TV setup and your country

selection in the initial setup the Home menu may

󰀨

The available options of the Home Screen are posi-

tioned in rows. To navigate through the Home Screen

options use the directional buttons on the remote.

Apps, YouTube, Google Play Movies & TV, Google

Play Music and Google Play related rows and rows of

the applications you have installed might be available.

Select a row then move the focus to the desired item

in the row. Press OK button to make a selection or to

enter a sub-menu.

On the upper left of the screen, search tools will be

located. You can choose either to type a word to start

a search via the virtual keyboard or try voice search

option if your remote has a built-in microphone.

Move the focus to the desired option and press OK

to proceed.

On the upper right of the screen, , Inputs,

Network & Internet (will be named as Connected or

Not Connected according to the current connection

status), Settings and the current time will be displayed.

Lenco LED-4353 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info