793288
22
Zoom out
Zoom in
Vorherige Seite
1/163
Nächste Seite
20
After initial pairing, the projector and the Bluetooth speakers will stay paired
unless unpaired manually by the user, or erased due to a reset of either device. If
this occurs or you find either unit is unable to connect, repeat the above steps.
Note: If external devices are connected with a VGA cable, only video image is
transmitted (no sound). The Bluetooth option can’t be used in vga mode.
“This product has a bluetooth transmission function, you can not receive any
bluetooth sound on it: this means that you can transmit wirelessly a bluetooth
sound signal to an external device like a bluetooth speaker, bluetooth headphone,
audio system with bluetooth reception,…”
OSD Language
English
Bluetooth
Restore Factory Default
Panel Rotate
0
Info
Warning about sound delay during Bluetooth transmission
It could be that you experience a slight delay between the image of a movie and
the sound you transmit.
This is due to different Bluetooth chipsets used in the LCD projector and your
audio device (speaker or headphone).
You can try to stop and reconnect the audio device a few times, but if the
problem is not solved you better connect the external speaker or headphone by
cable through the earphone jack (14)
Using Projector Menu 1.0
Press button to enter projector menu. Press again to previous status.
Picture Mode
Standard
Use buttons to select an item.
The selected item is displayed in the
upper right of the screen.
Contrast
50
Brightness
50
Color
50
Sharpness
50
Tint
50
Color Temperature
Medium
Aspect Ratio
Auto
Noise Reduction
Middle
Screen
1. Picture Mode
Select Vivid, User (custom), Soft, or Standard
2. Contrast, Brightness, etc
Set Picture Mode to “User” to adjust these settings. Tint can only be adjusted in
AV and NTSC IN
3. Color Temperature
Select Warm, Cool, or Medium.
22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lenco LPJ-500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info