793002
9
Zoom out
Zoom in
Vorherige Seite
1/47
Nächste Seite
9
PROGRAMMED PLAY MODE
In programmed play mode, you can program the play order of the tracks on your CD� You can program
up to 20 tracks in total�
Note: To set up programmed play mode, the CD must be stopped in the CD compartment and must not
be paused or playing�
In CD mode, with the CD you wish to programme in the CD compartment and stopped:
1� If the CD is playing press to stop /
2� Press and release the ‘Prog’ button, ‘P01’ is displayed�
3� Use the Tune or Tune buttons to go to the track number that you would like to program to play
rst. Press and release the ‘Prog’ button to conrm.’
4� P02’ will now be displayed and you can select the second track that you would like to programme�
Continue to select each track as in Steps 2 and 3 above, up to a total of 20 tracks�
5� Press “Play” to start playing programed tracks�
Note: In programmed play mode the icon will be displayed�
To exit programmed play mode, press stop button twice.
REPEAT/RANDOM MODE
Repeat current track only
Press the ‘Repeat’ button once, the repeat single track icon will be displayed�
Repeat all tracks�
Press the ‘Repeat’ button a second time, the repeat all icon will be displayed�
Random�
Press the ‘Repeat’ button a third time, the RAND icon will be displayed�
Cancel repeat�
Press the ‘Repeat’ button a fourth time to switch off repeat mode�
AUX IN MODE
Check that your Micro is in Aux in mode. If you are not already in Aux in mode, briey press and release
the ‘Mode’ button until you are in Aux in mode (check the display)�
Using a 3�5mm audio input connection cable (not included), Aux in allows for a quick and easy
connection to an external sound source�
Connect one end of the 3�5mm audio connection cable to the headphone (or auxiliary out) socket of
your secondary device, connect the other end to the auxiliary socket on the back of your Micro� Press
the ‘Play’ button on your external device to start playback through the Micro speakers. To gain optimal
volume levels, adjust the output volume level on both the secondary device and on the Micro� Note: It is
recommended that you unplug the Audio cable from the Line in socket after you have nished listening to
your external device�
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lenco MC-013 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info