Bedienungsanleitung Lenco MCI-210 (Seite 4 von 40) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

534852

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Manual tuning

You can use the manual tuning to tune to weak stations or your desired frequency.

1. Repeatedly touch on the I◄◄ or ►►I touch pad until you read the correct frequency or the reception is at

its best.

2. The display will show the stereo icon “ ” if a FM stereo station is received. (F. 5)

Automatic tuning

1. Keep touching on the I◄◄ or ►►I touch pad until it starts to search down or up, it will automatically search

for the first station of sufficient signal strength.

2. Repeat the above procedure if you wish to select another station.

Programming preset stations (remote control only)

You can preset stations of your choice and store up to 30 FM stations into its memory.

1. Press the TUNER button on the remote to select radio mode, then tune to the desired station.

2. Press the PROGRAM button on the remote once, the display will show “01” and flash, press the

PS/FOL/MENU +/- buttons on the remote to select the preset station number. (F. 6)

3. When your desired preset station number appears, press the PROGRAM button again to confirm your

selection, the current station will be stored in your desired preset number.

4. Repeat the above steps to program more preset stations or to change the stored preset station, storing a

new station into a preset location will erase the previous stored station in that location.

Selecting the preset stations (remote control only)

1. Press the TUNER button on the remote to select radio mode.

2. Press the PS/FOL/MENU +/- buttons on the remote to select your desired preset station, the display will

show the preset station number and the frequency.

LISTENING TO YOUR COMPACT DISCS

NOTE : Although this CD/MP3 player can read CD-R and CD-RW discs in addition to normal CDs, the playability

of CD-R and CD-RW discs may be affected by the type of software that was used to create the discs, as well as

the quality and condition of the blank media you are using, 100% playability cannot be guaranteed. This is not an

indication of a problem with the player.

IMPORTANT : THIS MODEL HAS A MOTORIZED ELECTRONIC CD DOOR. DO NOT ATTEMPT TO OPEN THE

DOOR MANUALLY. THIS COULD CAUSE DAMAGE TO THE DOOR OPENING MECHANISM.

Playing the entire CD

1. When the unit is ON, touch on the CD touch pad to select CD function. The display will first show “CD” and

then finally “No DISC” to indicate that there is no disc in the player. (F. 7)

2. Touch on the OPEN/CLOSE touch pad to open the CD door, the display will show “OPEN”.

3. Load the disc with the printed label side facing up and then touch on the OPEN/CLOSE again to close the

CD door. The display will first show “READING” and then finally the total track number and time will be

displayed. (F. 8)

4. To start playback from the beginning, touch on the ►/ II touch pad. If a MP3 disc is being played, “MP3” will

be displayed. (F. 9)

5. To interrupt playback, touch on the ►/ II touch pad, the elapsed time in the display will flash.

6. To resume playback, touch on the ►/ II touch pad again.

7. To stop playback, touch on the ■ touch pad.

Selecting a different track during play

1. During playback, repeatedly touching on the I◄◄ or ►►I touch pad until you read your desired track in the

display, playback will be started from this track.

2. If a MP3 disc is being played, the display will show the ID3 tag if available.

3. To select other folders in the MP3 disc, press the PS/FOL/MENU +/- buttons on the remote.

4. To play the next track, touch on the ►►I touch pad once.

5. To play the current track again from the beginning, touch on the I◄◄ touch pad once.

6. To play the previous track, touch on the I◄◄ touch pad twice.

UK-3

F.5

F.4

F.6

F.7

F.8

F.9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenco MCI-210 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info