Bedienungsanleitung Lenco MCI-220 (Seite 6 von 60) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

534853

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

UK-5

USB/SD CARD OPERATION

During in the STANDBY mode

1. Insert the USB DEVICE or SD CARD, and then press the STANDBY/ON button on the unit (or remote control) to

power"ON" the unit.

2. Press the CD/iPod/USB/CARD button on the unit (or remote control) to select the USB or SD CARD mode. The

main unit will automatically read the total number of the folders and tracks at the same time. (F4,F5) The unit will

play the first track automatically.

3. If the USB memory device more than one folder.

a. Press the FOLDER(UP or DOWN) button on the remote control to select each folder.

b. Press the SKIP/TUNE SEARCH (UP or DOWN) button on the unit (or remote control) to select current track in

desired folder.

Note: 1. The main unit can play MP3 and WMA only in this mode.

3. The main unit does not support the WMA file which is protected by "DRM FILE". It just support USB version

1.1 and 2.0.

1. Press the PLAY/PAUSE/SCAN/ENTER button once, the time elapsed indicator will flash.

2. Press the SKIP/TUNE SEARCH(UP or DOWN) button once to change Track NO., press and hold the SKIP/TUNE

SEARCH(UP or DOWN) button on the unit once (or remote control) to skip fast forward or backward of each song.

3. To resume playback, press the PLAY/PAUSE/SCAN/ENTER button once more again.

4. To change the ALBUM NO., press the FOLDER(UP or DOWN) button on the remote control once.

5. To stop playback, press the STOP/MENU/ button once on the unit (or remote control).

2. This unit can support most of USB devices and SD/SDHC cards (up-to 32GB memory capacity for

SDHC). It cannot access (or, need longer time to access) those devices with big memory capacity.

Playing The Entire flash disc

In any time, the USB DEVICE or SD CARD must be fixed well under in the STANDBY mode to avoid the main

unit and USB DEVICE or SD CARD were damaged.

INFO

Note :

F1 F2

CD/MP3/WMA OPERATION

Listening To Compact Disc (CD/MP3/WMA)

1. Press the CD/iPod/USB/CARD button on the unit (or remote control) is select to CD/MP3 mode. The unit will read

the CD/MP3/WMA disc automatically.

2. P (F1)

3. Insert the CD/MP3 disc into the CD compartment, press the CD to close the CD door.

Note: 1. This unit can play CD, CD-R, CD-RW, MP3 and WMA discs. It also play the "8 cm" and "Multi Section" of MP3

DISC.

2. The "Playback Transfer Bit Rate in MP3 is 32 - 320 kbps and WAM is 64 - 320 kbps.

3. The "Max Readable 99 folders and 999 tracks. If no disc or can not read the TCO, "NO DISC" will be

displayed.

Playing The Entire CD/MP3/WMA

- CD

1. Insert the CD disc into the CD compartment, the main unit will automatically read the total number of the folders

and tracks at the same time, the unit will play the first track automatically.(F2)

2. Press the PLAY/PAUSE/SCAN button once, the time elapsed indicator will flash.(F3)

3. Press the SKIP/TUNE SEARCH(UP or DOWN) button once to change Track NO., press and hold the SKIP/TUNE

SEARCH (UP or DOWN) button to skip fast forward or backward of each song.

4. Press the PLAY/PAUSE/SCAN/ENTER button once more to resume the playback. To stop by pressing the

STOP/MENU/INFO button.

- MP3/WMA

1. Insert the MP3/WMA disc into the CD compartment, the main unit will automatically read the total number of the

folders and tracks at the same time, the unit will play the first track automatically.

2. Press the PLAY/PAUSE/SCAN/ENTER button once, the time elapsed indicator will flash.

3. Press the SKIP/TUNE SEARCH(UP or DOWN) button once to change Track NO., press and hold the SKIP/TUNE

SEARCH(UP or DOWN) button on the unit once (or remote control) to skip fast forward or backward of each song.

4. To resume playback, press the PLAY/PAUSE/SCAN/ENTER button once more again.

5. To change the ALBUM NO., press the FOLDER/ARROW (UP or DOWN) button on the remote control once.

6. To stop playback, press the STOP/MENU/ button once on the unit (or remote control).

ress the CD DOOR OPEN/CLOSE button on the main unit only, and then the CD door will open automatically.

OPEN/CLOSE button

Note: If the main unit is not working properly, disconnect the power source and then reconnect it again.

INFO

ID3 OPERATION

During in the MP3/WMA mode

1. Press the ID3/iPod/MEM/C-ADJ. Button on the unit (or remote control) once to open the ID3 function.

2. If the MP3/WMA file is written “ID3”, it will automatically search the information of “TITLE NAME”, “ARTIST NAME”

and “ALBUM NAME” indicated on the display .

3. Press the ID3/iPod/MEM/C-ADJ. button on the unit (or remote control) again. Then the unit will resume to play

normally.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenco MCI-220 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info