694898
10
Zoom out
Zoom in
Vorherige Seite
1/78
Nächste Seite
Turning the Bluetooth
®
sound system on/off
m Set the POWER switch to ON to switch the Bluetooth
®
sound system on.
m Set the POWER switch to OFF to switch the Bluetooth
®
sound system off.
Establishing a Bluetooth
®
connection
1. Switch the Bluetooth
®
sound system on.
2. Press and hold the BT button for approx. 3 seconds. A short melody will sound followed
by 2 short beeps.
3. Release the BT button.
4. Switch on your mobile device.
5. Activate the Bluetooth
®
function on your mobile device.
6. Start the device scan on your mobile device.
7. Select Lenco PA-325 from the list and connect the devices.
Once the devices are connected with each other, a short melody will sound. The Bluetooth
®
indicator light lights up.
If you switch the Bluetooth
®
sound system off for a while, it will automatically
connect with the device connected before when it is switched back on again.
If not, you need to press and hold the BT button for approx. 1 second (short
melody will sound) to have it reconnect with the Bluetooth
®
device.
The Bluetooth
®
device must be placed nearby, switched on and Bluetooth
®
must be activated. Once the Bluetooth
®
device has been connected, two
short beeps will sound.
If you connect a device to the AUX INPUT connection socket, it will be the
preferred connection for playback. The transmission from the Bluetooth
®
device will be paused. The transmission from the Bluetooth
®
device will not
resume until you remove the plug from the AUX INPUT connection socket.
Disconnecting a Bluetooth
®
connection
There can only be one device connected to the Bluetooth
®
sound system via Bluetooth
®
at
any time.
If you would like to pair another device, you must first end the existing connection by...
... switching off the Bluetooth
®
function on your mobile device or
... keeping the Bluetooth
®
button BT pressed for approx. 3 seconds. A short melody will
sound.
Reset
Electromagnetic interference around the device could lead to malfunctions. If the device
does not connect, proceed as follows:
1. Move the device away from the electromagnetic interference.
2. Switch the Bluetooth
®
sound system off (POWER switch is set to OFF).
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lenco PA-325 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info