Bedienungsanleitung Lenco PA-85 (Seite 6 von 11) (Englisch)

601595

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

BLUETOOTH

Press the INPUT SWITCHING Button until the BLUETOOTH Indicator blinks. The

BLUETOOTH function is ON. Turn on the BLUETOOTH in device and start searching for this

BLUETOOTH speaker. You will find device name of LENCO PA-85. Select this to link to the

speaker. The Indicator will stop blinking and light up in BLUE color when you are successfully

linked. After the linking, you can start to play music from your device.

When Bluetooth is paired and connected, you can press and hold the play/pause button to

disconnect the current connection and re-pairing once.

POWER SUPPLY SELECTION

Back Panel:

1. Power Jack: Insert the power cord to this jack and connect to AC 230V 50-60Hz.

2. Power Source Switch: AC INPUT, F.CHARGE/OFF, DC INPUT

3. AC Power Switch: AC ON, OFF, CHG ON

How to Use the Switch:

 AC Power Supply, connect the power cord to AC230V 50-60Hz, switch the Power Source

Switch to AC INPUT, and switch the AC power switch to AC ON. To turn the system off,

switch both to OFF.

 Internal DC Power Supply, now the system is powered by built-in battery (12V, 4.5Ah).

Switch the Power Source Switch to DC INPUT, and switch the AC power switch to AC

OFF. To turn the system off, switch both to OFF.

To charge the system, connect the power cord, switch the Power Source Switch to F.

Charge and switch the AC power switch to CHG ON. To use and charge the system in the

same time, switch the Power Source Switch to AC INPUT, and switch the AC Power

Switch to CHG ON.

 External DC power supply: DC12-15V (Min. 50W). Turn OFF the AC POWER Button and

unplug the power cord from the AC outlet. Then turn the POWER SOURCE button to DC

INPUT. Then, connect the positive pole of your external power supply to the RED terminal

and connect the negative pole to the BLACK terminal in speaker back panel as the below

picture. The speaker here is powered by external DC power supply. This operation is for

reserve usage when battery runs out of power.

BATTERY PANEL

This panel is to be opened ONLY when replacing a new battery by qualified service centers. To

avoid any potential dangers and damages to the battery, please make sure that the new battery

are of the same specification with the original battery. Please follow the below steps properly:

1. Remove the 6 outlying screws and take out the panel.

2. Take out the battery and press the clinching fasteners to unplug the lead wires. Please work

carefully to avoid damages.

3. Remove the 2 screws on the metal-battery-fame.

4. Replace with the new battery. Be sure that the new battery is of the same specification with

the original battery. Connect the Red cable to the Red Terminal and Black cable to Black

Terminal. After inserting and plugging the terminals, please make sure that the connections

are fixed tightly without any loose.

5. Screw back both metal-battery-frame and battery panel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenco PA-85 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lenco PA-85

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info