Bedienungsanleitung Lenco PDR-050 (Seite 9 von 58) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

694789

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

Parameters

• On time – hours and minutes

• Duration –15, 30, 45, 60, 90 minutes if the alarm is not cancelled Venus returns to standby after this time period.

• Source – DAB | FM |Buzzer If DAB or FM is chosen as the audio source you will also be prompted to select the Last played

station or one of the preset stations (if there are any presets).

• Daily | Once | Weekends | Weekday | Choose the days on which the alarm is active. Note: if you choose ‘Once’, you are

prompted to enter the required date.

• Volume – (increase/decrease using the SKIP+/SKIP- button) This is the volume the alarm will build up to. (Initially the

alarm starts at a low volume and gradually gets louder to the configured volume).

In all listening modes active alarms are indicated by displaying the relevant Alarm 1 and/or Alarm 2/Alarm 3/Alarm 4 icons.

At the set time, the alarm will sound, quietly at first, then gradually building up to the configured volume. When an alarm

sounds, the bell icon will flash on the display.

To cancel a sounding alarm and switch the radio to standby press the Standby button.

2. Sleep

This will configure the sleepmode. You can choose the sleep delay time in minutes from:

Sleep Off | 15 | 30 | 45 | 60 | 90

Use SKIP-/SKIP+ button control to cycle through the options then press ENTER to select the displayed value.

When the sleep time is configured, the display will show the sleeptimer on the top right of the display. Indicating that the

sleeptimer is active.

3. Equaliser

This presents a number of preset settings plus a My Equaliser option to allow you to create your own equaliser settings.

My EQ...

Treble – (Use the SKIP-/SKIP+ button control to choose a value between -7 and +7)

Bass – (Use the SKIP-/SKIP+ button control to choose a value between -7 and +7)

4. Backlight

The radio display has a backlight with three brightness settings, and adjustable timeout (this is the time delay, in seconds,

after which the display switches to the Dim level).

There are three settings:

• Timeout - Light On | 10 | 20 | 30 | 45 | 60 | 90 | 120 | 180 seconds

• On level - Low | Mid | High

• Dim level - Low | Mid | High

Note: as you cycle through the possible values, an asterisk appearing to the right-hand side of the display indicates the

currently selected value for each setting.

5. Language

The language used for display messages can be selected from:

Language

English, Deutsch, Francais, Nederlands, Español, Italiano, Portugues

6. Factory reset

A factory reset clears all user defined settings, replacing them with the original default values, so time/date,

preferences/settings, DAB station list and preset stations are all lost.

If you select Factory reset, you are asked to confirm by selecting Yes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenco PDR-050 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info