Bedienungsanleitung Lenco SCD24 (Seite 2 von 9) (Englisch)

62747

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

WARNING

CLASS 1 LASER PRODUCT

This product contains a low power laser device.

CLASS 1 LASER PRODUCT

APPAREIL Á LASER DE CLASSE 1

PRODUCTO LASER DE CLASE 1

CAUTION

INVISIBLE LASER RADIATION

WHEN OPEN AND INTERLOCKS

DEFEATED.

AVOID EXPOSURE TO BEAM

CAUTION

Usage of controls or adjustments or performance of procedures other than those specied herein may result in hazardous

radiation exposure.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the

whole device.

2. Install in accordance with the supplied user manual.

3. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products or

naked ame. The device can only be used in moderate climates. Extremely cold or warm environments should be avoided.

Working temperature between 0° and 35°C.

4. Avoid using the device near strong magnetic elds.

5. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the

instruction manual. During le transmission, please handle with care and operate in a static-free environment.

6. Warning! Never insert an object into the product through the vents or openings. High voltage ows through the product and

inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or

liquid on the product.

7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.

8. The device shall not be exposed to dripping or splashing and make sure that no objects lled with liquids, such as vases,

are placed on or near the apparatus.

9. Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets

or condensation may occur inside the unit and the unit may not function properly; let the unit stand in power OFF for 1 or 2

hours before turning on the power: the unit should be dry before getting any power.

10.Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still

possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or

any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.

11.This device must operate on a power source as specied on the specication label. If you are not sure of the type of power

supply used in your home, consult your dealer or local power company.

12.Keep away from animals. Some animals enjoy biting on power cords.

13.To clean the device, use a soft dry cloth. Do not use solvents or petrol based uids. To remove severe stains, you may use

a damp cloth with dilute detergent.

14.The supplier is not responsible for damage or lost data caused by malfunction, misuse, modication of the device or battery

replacement.

15.Do not interrupt the connection when the device is formatting or transferring les. Otherwise, data may be corrupted or lost.

16.If the unit has USB playback function, the USB memory stick should be plugged into the unit directly. Don't use an USB

extension cable because it can cause interference resulting in failing of data.

17.The rating label has been marked on the bottom or back panel of the device.

18.This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of

experience and knowledge, unless they're under supervision or have received instructions about the correct use of the

device by the person who is responsible for their safety.

19.This product is intended for non professional use only and not for commercial or industrial use.

20.Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position

vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be

covered by warranty..

21.Never remove the casing of this device.

22.Never place this device on other electrical equipment.

Warning: Do not touch the lens.

DO NOT THROW BATTERIES IN FIRE !

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenco SCD24 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lenco SCD24

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info