Bedienungsanleitung Lenco Sportcam-200 (Seite 1 von 2) (Englisch)

534944

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Sportcam-200 Camera User Manual

1. Key Features

• Record max 1080p FHD video by using one easy slide switch

• Take 5 MP digital photographs

• Accept MicroSD card and allows you to take FHD videos for 2.5 hours with 32GB

memory.

• Built-in 1050mAh Li-ion battery for around 3 hours continuously use

• Waterproof up to 10 meters depth without using extra casing

2. Package Contents

Carefully unpack the package and ensure that you have the following items:

1 Camera body 6 CamLocker Key

2 Back Cover 7 CamLocker Socket - Ball Joint

3 Mini USB cable 8 Bike Mount

4 Secure strap 9 Carry Bag

5 CamLocker 10 User Manual

3. Functional Parts

Cover Lens

High quality lens

LED indicator

Show the camera status

Power / Shutter Button

1. Turn the camera on or off

2. Take single photograph

Record & Stop Slide Switch

Slide to start or stop video recording

Cam Back Cover

Rotate to seal the camera

Tripod Socket

Accept CamLocker or other mount using similar

tripod screw

Strap Vent

Loop with wrist or secure strap

Cover latch

Lock the back cover

Micro HDMI terminal

Connect the camera to TV via HDMI cable

Video Resolution Slide

Switch

Select video resolution: FHD or HD

MicroSD Card Slot

Micro SD card storage location.

Reset

Reset the camera

Mini USB Slot

1. Connect to computer for data transfer or

camera setup

2. Charge your camera

4. Using the Camera

4.1 Charging up Your Camera

Charge your camera with either USB cable or AC/DC adapter (not included). The red LED

lights up to indicate the camera is charging and turns off as soon as the camera has been

fully charged. It takes about 2 hours to fully charge the camera.

4.2 Inserting a Memory Card

Insert a MicroSD card (not included) before using your

camera. Assure that the camera power is turned OFF

before inserting the card to the slot.

Notes

1. There is only one correct direction to insert the

MicroSD card into the slot. Do not force the card in

the card slot as it may damage both the camera and

the MicroSD card.

2. A new MicroSD card should be formatted before using. For more information, please

see section 5.

4.3 Set up Date and Time

You can set the camera’s clock with the software to ensure that your video and photo files

are saved with the correct date/ time information.

To set up the camera clock

1. Connect your camera to a computer with the USB cable. Run setting_win.exe at your

MicroSD card folder. If you are a MAC user, run setting_mac.app instead

2. Find the “Date and Time” and click “SET”.

3. Adjust the date and time or click “Sync with PC” to set with your PC clock.

4. Click “OK” to save the settings.

5. After you complete the setting, disconnect the camera from your PC immediately to

make the date and time set correctly.

4.4 Sealing Your Camera

The Waterproof Housing lets the camera perform up to 10 meters

or 30 feet under water. You must seal the camera with Back

Cover in order to protect the camera when using it in wet or moist

conditions.

To secure the Back Cover

1. Attach the Back Cover to the back of the camera and rotate

clockwise until the two black dots are aligned

2. Slide the latch on the Back Cover to lock it.

To open the back cover, slide the latch on the back cover

to loosen it. Rotate the cover counterclockwise until the

white and black dots are aligned.

Notes

1. Failure to properly seal your camera can result in leaks that damage or destroy your

camera. Your warranty does not cover water damage resulting from user damage.

2. The rubber seal on the Cover forms the waterproof barrier to protect the camera in

wet and underwater conditions. You must keep this seal clean as a single strain of

hair or grain of sand can cause a leak into the product.

3. After every use in salt water, you will need to rinse the outside of the product and the

seal with non-salt water and dry. Not doing this can cause corrosion in the product or

failure in the seal, in turn, damaging the product.

4.5 Power On & Power Off

To power ON the camera:

Press and hold

button. The camera will vibrate and the Green LED will turn on.

To power OFF the camera:

Press and hold

button. The camera will vibrate two seconds and the Green LED will

turn off.

4.6 Recording Videos

Before starting recording, select the video resolution 1080p (1920x1080) or 720p

(1280x720) by switching the Video Resolution Switch

There are two methods available for starting the video record function. When starting a

video recording, a short vibration indicates recording started. The LED indicator illuminates

RED throughout the recording.

1. Whether the camera power is ON or OFF, simply slide switch towards the

camera front to start recording and you can see a red REC mark

2. When your camera is OFF and

switch is at REC location, press and hold

the

button to turn the camera ON and it will start recording.

Slide switch backward to stop recording and you can see a green STOP mark.

The camera will vibrate and the LED indicator will illuminate GREEN to indicate the

recording has stopped. The camera will then enter Standby mode.

An additional option is to hold

button to stop the recording and turn the camera off.

The camera will vibrate two seconds and the Red LED light will turn off.

Notes

1. Changing video resolution is disabled during video recording.

2. There will be around 2-3 seconds delay before the camera starts recording.

3. Assure there is sufficient memory available on the MicroSD card. If the card is full,

the camera will vibrate for five seconds and the Green LED will flash continuously.

4.7 Taking Photos

1. Turn on the camera by pressing button.

2. After the camera power has been turned on, press

button to take a photo. A

short vibration and a flash of Green LED indicate the action was successful.

Notes

1. The Still Photo function is disabled during video recording.

2. If the card is full, the camera will vibrate for five seconds and the Green LED will flash

continuously.

4.8 Auto Rotation

The camera has a built-in G-sensor which is able to detect the camera orientation. By

rotating your camera to 180

from the default position, the recorded view will be rotated in

the same angle. This allows the user to mount the camera in different orientation without

recording a rotated or inverted view.

Notes

1. The feature is available only for videos capturing, not for still photos.

2. Adjust your camera orientation before you start the video recording. The rotation

feature will not be activated throughout the recording.

3. You can disable the auto rotation function in the “General settings” with the software

Lenco Sportcam-200 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lenco Sportcam-200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info