601209
8
Zoom out
Zoom in
Vorherige Seite
1/15
Nächste Seite
E-7
Note :
In Radio Mode, press and hold the Button (#6). The SR-600 BT will scan the
whole band start from the lowest frequency and store all the available radio stations
start from lowest preset channel number. Those previous stored radio stations may be
overwritten.
RECALLING PRESET MEMORY CHANNELS
To recall a preset station,
1. In radio mode, tap the PRESET/TIME SET button (#2), the preset number will
appear on display.
2. Tap the PRESET/TIME SET button (#2) repeatedly to select the preset channel or
tap the button (#4) or button (#5) to recall the preset channel you want.
BLUETOOTH OPERATION
Pairing a Bluetooth enabled device with the SR-600 BT.
1. Turn on the SR-600 BT, tap the button (#10) to select Bluetooth
mode, “bt” will show on the LED Display (#12) and the BLUETOOTH INDICATOR
(#13) will flash.
2. Turn on the Bluetooth function for the device you want to link to, and enable the
search or scan function to find the SR-600 BT
3. Select SR-600 BTfrom the device list when it appears on your device screen. If
required, enter the pass code 0000 to pair (link) the unit with your device.
4. If you are pairing (linking) your computer to the speaker using Bluetooth, you may
need to set the SR-600 BT as your computer’s default sound device.
5. After successfully pairing (linking) the Bluetooth enable device, the BLUETOOTH
INDICATOR (#13) will stop flashing and remain lit and a short beep will be heard.
6. If you want to connect the SR-600 BT to another Bluetooth device, press and hold
the DIMMER/PAIRING button (#9) for 2 seconds, the Blue LED will change to
flashing again, repeat step 2-4 above.
Note :The SR-600 BT may automatically reconnected to a previously linked device
that is in range, so you may need to turn off the Bluetooth on any paired
device first before going through the above steps.
Now you can play music from your Bluetooth device wirelessly to the SR-600 BT.
1. Select your favorite song, press the
Play/Pause Button (#6)
on your
Bluetooth device or the
Play/Pause Button (#6)
on the SR-600 BT to play
or pause the song from your Bluetooth device.
2. Press the Skip Backward button (#4) or Skip Forward button (#5) to select
the Next or Previous track.
(The SEARCH function does not apply to Bluetooth operation )
3. Slowly adjust both the volume controls of your SR-600 BT and your Bluetooth
device until you reach a comfortable listening level.
Note :
1. Refer to the manual of your cell phone, tablet PC, computer or other Bluetooth
enabled devices for Bluetooth operation since it may vary from model to model.
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lenco SR-600 BT wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Lenco SR-600 BT

Lenco SR-600 BT Bedienungsanleitung - Deutsch - 22 seiten

Lenco SR-600 BT Bedienungsanleitung - Holländisch - 17 seiten

Lenco SR-600 BT Bedienungsanleitung - Französisch - 17 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info