Restore device: Restore factory settings, select ‘Yes’ and push the Play/pause (8) button to confirm
restoring, the player will reboot;
Ear protect: Enables/disable high volume message if volume level is over 20;
Sleep timer: When activated the player will shut down after the chosen time, regardless if the music
is playing or not. You can choose between 15min, 30min, 60min, 100min, or choose “turn off” to
disable this function.
Note: The sleep timer will be set to the default setting “Turn off” when the Xemio is turned off/on
again.
Power saving: When the player is idle, it will shut down automatically after the configured time. You
can select Turn off, 30s, 1min, 2min.
Backlight timer: The display will darken at the configured time. The Xemio will still be active. Press
any key to reactivate the display. You can choose 10s, 20s, 30s or Always on.
Language: Press next (7) or previous (4) to select the desired language and press the play/pause (8)
button to confirm
Information: Will show ‘Player info’ & ‘Disk space’ of the Player.
Format Device: Will erase all data on the memory card. Pressing the Play/pause (8) button will show
the warning message “All data will be erased. Continue?”. Select “yes” to start erasing.
Auto upgrade: If a new firmware is released, you can install the FW on the MicroSD. Press the
Play/pause (8) button, when the firmware file is selected, to start upgrading.
Note: you are suggested to consult with our technical support before upgrading the player, because
improper upgrade may damage the player.
In the tools section you find the stopwatch function. Press the play/pause (8) button to start the stopwatch.
It will show 5 (lap) times, which you can select with the next (7) or previous (4) buttons.
Pressing the play/pause (8) button will start/stop the active (lap) timer. Press [M] (5) to reset all (lap) timers
Press [ ] (6) to go back to the main menu.
