214280
37
Zoom out
Zoom in
Vorherige Seite
1/62
Nächste Seite
Appendix B. Troubleshooting your setup
This section provides information on setup troubleshooting.
The LED on top of the projector’s keypad indicates the state of the projector and
can help you troubleshoot. The following table describes LED behavior and
meaning.
LED color/behavior Meaning
solid green The projector is plugged in, or the projector
has been turned on and the software has
initialized. The projector has been turned off
and the fans have stopped.
blinking green The power button has been pressed and the
software is initializing, or the projector is
powering down and the fans are running to
cool the lamp.
blinking red A fan or lamp failure has occurred. Make
sure the vents aren’t blocked.Turn off the
projector and wait one minute, then turn the
projector on again. If the projector has been
working for 3000 hours or more, replace the
lamp and reset the lamp timer. Contact
Technical Support if the problem persists.
solid red An unidentifiable error: please contact
Technical Support.
The following table shows common problems. In some cases, more than one
solution is possible. Try the solutions in the order they are presented.
Problem Solution
No startup screen
v Plug in power cable and remove lens cap.
v Press Power button
Only startup screen appears
v Press the Computer button.
v Activate laptop’s external port.
v Restart laptop.
No computer image Set your computer’s display resolution to
the native resolution of the projector (Start
-> Settings -> Control Panel -> Display ->
Settings tab, select 1024x768). For a laptop,
turn on dual-display mode.
Image fuzzy or cropped Set your computer’s display resolution to
the native resolution of the projector (Start
-> Settings -> Control Panel -> Display ->
Settings tab, select 1024x768). For a laptop,
turn on dual-display mode.
Remote control not controlling my
computer’s mouse
Connect computer cable, then load USB
drivers, if needed.
Image not square Adjust keystone on keypad.
© Copyright IBM Corp. 2003 27
37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lenovo ilc300 conference room wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info