Bedienungsanleitung Lenovo Legion 7 - 2021 (Seite 28 von 48) (Englisch)

779648

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

In another scenario, if you carry your computer around without the included ac power adapter, you may use

a capable USB-C charger to provide power through the rear USB-C port. In both scenarios, the output

power of a USB-C charger or the USB-C port on a dock or display should be at least 20 V and 2.25 A in order

to provide power to your computer. The following table lists the charging capability of a USB-C port on a

charger or an external device based on its maximum output power.

Table 1. Maximum output power of a USB-C port and its capability of charging the computer

Maximum output power of a USB-C port Capability

20 V, 3.25 A or greater Capable of charging the computer

20 V, 2.25 A or greater, but less than 20 V, 3.25 A Capable of charging the computer in sleep, hibernation,

or powered-off state

Less than 20 V, 2.25 A Cannot provide power to the computer or charge the

battery

Note: If the computer is already connected to an electrical outlet using the included power adapter, the

computer will not receive power through the USB-C port.

The rear USB-C port is not designed as the primary power input port. If it is used as the only external power

source, the computer may not operate at its full capacity and battery charging may be longer than expected.

Whenever possible, use the included ac power adapter to provide power to your computer.

A power plan

A power plan is a collection of power-saving settings made available by an operating system. With a power

plan, you can set idle time-outs for different hardware components to enter a low-power state. The default

power plan and some of its idle time-out settings are listed below for computer models pre-installed with

Windows 10.

The listed settings are active when the computer is connected to an electrical outlet. If your computer include

a built-in battery pack, a different collection of time-out settings is set to take effect when the computer is

operating on battery power.

• Default power plan: Balanced

• Turn off the display: after 10 minutes

• Put the computer to sleep: after 30 minutes

Note: To wake the computer from the sleep state, press the power button or any key on the keyboard.

Change or customize a power plan

This operation is applicable to computers with pre-installed Windows 10.

Step 1. Right-click the battery status icon in the Windows notification area.

Step 2. Select Power Options ➙ Change plan settings.

You may select a different power plan or you can customize a plan by selecting Change plan settings.

Set operating mode

Your computer can work in different operating modes. The performance and power consumption of the

computer vary in different operating modes. Press Fn + Q to cycle through different operating modes.

Note: Performance mode is not available when your computer runs on battery power.

22 User Guide

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenovo Legion 7 - 2021 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lenovo Legion 7 - 2021

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info