Bedienungsanleitung Lenovo px12-450r - LifeLine 4.1 (Seite 88 von 167) (Englisch)

611570

Zoom out

Zoom in

Vorherige Seite

1/167

Nächste Seite

Adding and Managing Storage Pools

A Storage Pool is a grouping of drives with a certain storage size and an assigned data protection. A

Storage Pool has a minimum of one drive. By default, your px12-450r Network Storage has one Storage

Pool. If you add drives to your px12-450r, you can create additional Storage Pools. If your px12-450r

includes different capacity drives, you will need to create additional Storage Pools as all drives in a single

Storage Pool must be the same capacity.

If your px12-450r has one or more SSD drives installed, you can create a Cache Storage Pool, which is a

grouping of solid-state drives that helps increase read and write performance to volumes in a data Storage

Pool. See Creating a Cache Storage Pool, for more information on this option.

Adding a Data Storage Pool

Adding a new Storage Pool requires available drives, that is drives that are not already incorporated into an

existing Storage Pool. If you want to use multiple Storage Pools and all drives are already included in an

existing Storage Pool, you will need to delete the existing Storage Pool before proceeding with the steps

below.

1. Open the Drive Management feature and click Add Storage Pool.

2. In the Information section, enter a name for the Storage Pool.

3. To set the RAID protection, choose a value from the drop-down menu:

● Double Parity (RAID 6): Combines six or more drives in a way that protects data against

loss of any two drives.

● Parity (RAID 5): Uses the space corresponding to one drive-size for protection, leaving

remaining space for storing actual data.

● Mirror Stripe (RAID 10): Uses half of the storage space for protection, leaving half for actual

data. Protects data in the event of a single drive failure. Requires at least four drives.

● None (RAID 0): Uses all of the storage space for data. Does not protect against data loss in

the event of drive failure; however, the drive are striped for better performance.

● None: Uses all of the storage space for data, providing contiguous storage space by

concatenating all member drives. Does not protect against data loss in the event of drive

failure.

4. Select the checkbox of the drive or drives you want to add to the Storage Pool. All drives in a

Storage Pool must be the same size. If your px12-450r includes different capacity drives, you will

need to create a Storage Pool for each capacity grouping.

5. Check Enable periodic consistency check to enable a monthly parity or mirror consistency

check.

The check helps to prevent a single drive failure from becoming a two-drive failure, resulting in

data loss. The check runs for several hours and can affect performance of the px12-450r. If you do

not want to run the check, remove the check mark for this option.

6. If commonly used Shares, Backups, Documents, Movies, Music, Pictures, and SharedMedia do

not already exist on the px12-450r device, check Create commonly used Shares to create

these Shares and add them to the Storage Pool.

Storage Pool Management

Adding and Managing Storage Pools 78

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenovo px12-450r - LifeLine 4.1 Seite 88

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lenovo px12-450r - LifeLine 4.1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info