Bedienungsanleitung Lenovo px4-300d - LifeLine 4.0 (Seite 17 von 164) (Englisch)

611571

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

Enabling Jumbo Frames for Each NIC

You can enable jumbo frames for each NIC in your px4-300d by expanding the Information section for a

NIC and entering a jumbo frame size in the Jumbo Frame field. If you do not want jumbo frame support,

leave the field blank. Jumbo frame support is useful for transferring large files, such as multimedia files,

over a network. Jumbo frame support increases transfer speed by placing large files in fewer data packets.

It also reduces the demand on the device hardware by having the CPU process more data in fewer data

packets.

Jumbo frame support should only be enabled if you are sure your network is jumbo-frame compatible and

all network devices have been configured to support jumbo frames. It is recommended that you confirm all

network interface cards (NICs) are configured to support jumbo frames before enabling this feature.

VLAN

Each NIC in your px4-300d can be added to up to four Virtual LANs (VLAN). For more information on

adding a NIC to a VLAN, refer to VLAN Settings.

Manually Configuring Network Settings

There are various settings in the network setup that you can manually configure.

1. Click Modify network settings.

2. Uncheck Automatically configure DNS, WINS, and all IP addresses (DHCP).

3. DNS Servers — enter the IP addresses of the DNS (Domain Name System) servers. DNS is

used for translating the domain name to IP addresses.

4. WINS Servers — enter the IP addresses of the WINS server.

5. From the Bonding Mode drop-down menu, choose one of the following:

● Transmission Load Balance — increases bandwidth by distributing the load across multiple

NICs.

● Link Aggregation — increases bandwidth by distributing the load across multiple ports in a

switch. Link Aggregation requires an 802.3ad compatible switch.

● Failover — provides recovery from a failure, so if one NIC should fail, your system still has

network connectivity with the other NIC.

6. To connect your px4-300d to a proxy server, check Use proxy settings and enter proxy IP

address, port number, and the proxy username and password.

7. Click Apply to save your settings.

8. If a DHCP server is unavailable for a network interface card (NIC), the device could auto-assign

an IP address, or you can uncheck the Automatically acquire network address (DHCP)

checkbox found in the Information section of a NIC.

9. You can change the following settings in the Information section:

● IP Address — the static IP address of the px4-300d. Use an available IP address in the range

used by the LAN.

● Subnet Mask — the subnet that the IP address belongs to. The default value is 255.255.255.0.

● Gateway — enter the gateway IP address in this field.

10. Click Apply to save your settings.

Setting up Your px4-300d Network Storage

Connecting

the px4-300d

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenovo px4-300d - LifeLine 4.0 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lenovo px4-300d - LifeLine 4.0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info