718888
26
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
Chapter 3. Reference information 3-4
Table3-2.Troubleshooting(continued)
Problem Possible cause Suggested action Reference
Screen is blank and
power indicator is
steady amber or
flashing green
The monitor is in
Standby/Suspend
mode
Press any key on the
keyboard or move the
mouse to restore
operation.
Check the Power options
settings on your computer.
Understanding power
management” on page
2-10
The power indicator
is green, but there is
no image.
The video signal cable
is loose or
disconnected from the
system or monitor.
Be sure the video cable is
connected with the system
properly.
Connecting and turning
on your monitor
” on
page 1-4
The power indicator
is green, but there is
no image.
The monitor
brightness and
contrast are at the
lowest setting.
Adjust the brightness and
contrast setting on the OSD
menu.
Adjusting your monitor
image” on page 2-6
One or more of the
pixels appear
discoloured
This is a characteristic
of the LCD
technology and is not
an LCD defect.
If there are more than five
pixels missing, contact the
Customer Support Centre.
Appendix A, “Service
and Support” on page
A-1
Fuzzy lines in text
or a blurry image.
Horizontal or
vertical lines
through the image.
Image setup has not
been optimized
Your system Display
Properties setting
have not been
optimized.
Adjust the resolution settings
on your system to match the
native resolution for this
monitor:
1920 x 1200 at 60 Hz.
Adjusting your monitor
image” on page 2-6
Fuzzy lines in text
or a blurry image.
Horizontal or
vertical lines
through the image.
Image setup has not
been optimized
Your system Display
Properties setting
have not been
optimized.
Perform automatic image
setup. If automatic image
setup does not help, perform
manual image setup.
Selecting a supported
display mode” on page
2-9
Fuzzy lines in text
or a blurry image.
Horizontal or
vertical lines
through the image.
Image setup has not
been optimized
Your system Display
Properties setting
have not been
optimized.
When working in the native
resolution, you may find
additional improvements by
adjusting the Dots Per Inch
(DPI) setting on your system.
See the Advanced section
of your system’s display
properties.
The image is not
acceptable when
switching to dual
mode
It has not set the
optimum resolution
for each mode
● Use ThinkVision Duo
software to optimize the
dual screen operation
● Adjust graphic card
resolution manually
Using the direct access
controls” on page 2-6
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lenovo T23D Thinkvision wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info