Bedienungsanleitung Lenovo ThinkPad P72 (Seite 87 von 156) (Englisch)

675760

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Using system management

This topic is primarily intended for the network administrators.

Your computer is designed for manageability, so that you can redirect more resources to better meet your

business objectives.

This manageability, known as total cost of ownership (TCO), enables you to remotely operate client

computers in the same way as you operate your own computer, such as turning on a client computer,

formatting a storage drive, and installing a program.

Once the computer is configured and operational, you can manage it by using the software and the

manageability features that are already integrated into the client computer and the network.

Desktop Management Interface

The UEFI BIOS of your computer supports an interface called System Management BIOS (SMBIOS)

Reference Specification, version 2.8 or later. SMBIOS provides information about the hardware components

of your computer. It is the responsibility of the UEFI BIOS to provide information about itself and the devices

on the system board. This specification documents the standards for getting access to this BIOS

information.

Preboot eXecution Environment

The Preboot eXecution Environment (PXE) technology makes the computer more manageable by enabling

the computer to start from a server. Your computer supports the personal computer functions that PXE

requires. For example, with the appropriate LAN card, your computer can be started from the PXE server.

Note: The Remote Initial Program Load (RIPL or RPL) function cannot be used with your computer.

Wake on LAN

The network administrator can turn on a computer from a management console by using the Wake on LAN

feature.

When the Wake on LAN feature is enabled, many operations, such as data transfer, software updates, and

flash updates of the UEFI BIOS, can be done remotely without remote attendance. The updating process can

perform after normal working hours and on weekends, so that the users are not interrupted during work, and

the LAN traffic is kept to a minimum. It saves time and increases productivity.

If the computer is turned on through Wake on LAN, the computer starts follow the Network Boot sequence.

Asset ID EEPROM

The Asset ID EEPROM contains information about the computer configuration and the serial numbers of the

key components. It also includes a number of blank fields where you can record information about the end

users in your network.

To enable a network administrator to remotely control your computer, set the following system-management

features in the ThinkPad Setup program:

• Wake on LAN

• Network Boot sequence

Note: If a supervisor password has been set, you are required to enter the supervisor password when you

start the ThinkPad Setup program.

Chapter 6. Advanced configuration 69

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenovo ThinkPad P72 Seite 87

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lenovo ThinkPad P72

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info