Bedienungsanleitung Lenovo ThinkPad T15P Gen 2 - 2021 (Seite 39 von 66) (Englisch)

779670

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

The Intel (R) Rapid Storage Technology window opens and the following options are displayed:

• Create RAID Volume: Create a RAID volume. If no internal storage drives can be used, this option is

not available.

• RAID Volumes: Confirm the information of the created RAID volumes.

• Non-RAID Physical Disks: Confirm the information of all non-RAID drives.

4. Press the up and down arrow keys to select an option. Press Enter to enter the menu for the selected

option. Press Esc to exit the Intel RST configuration utility.

Create RAID volumes

Attention: All the existing data stored on the selected drives will be erased while the RAID volume is being

created.

1. Enter the Intel RST configuration utility.

2. Select Create RAID Volume, and then press Enter to open the CREATE RAID VOLUME window.

3. Select and configure the options one by one.

a. Name: Use the default name or type a preferred name for the RAID volume.

b. RAID Level: Press Enter to change the RAID between RAID 0 (Stripe) and RAID 1 (Mirror).

c. Select Disks: Select a drive and press Spacebar or Enter to add it into a group. The drive that cannot

be used to create a RAID volume is not selectable. An X mark is displayed next to the selected drive.

d. Strip Size: Select a strip size and press Enter to complete the configuration. This option is only

available for RAID 0.

e. Capacity: Customize the capacity of the RAID volume. The default RAID volume is the largest value.

f. Create Volume: Press Enter to finish configurations of the preceding options and create a volume.

Note: The Create Volume option might not be selectable for some reasons, for example, if different

types of drives are selected, the option is not selectable. If it is not selectable, see the message

displayed under Create Volume for reference.

After the RAID volume is created, the Intel (R) Rapid Storage Technology window is displayed, and

the created volume is displayed under RAID Volumes.

4. Press F10 to save changes and exit.

Delete RAID volumes

Attention: All the existing data stored on the selected drives will be erased after you delete RAID volumes.

1. Enter the Intel RST configuration utility.

2. Select the volume that you want to delete under RAID Volumes. Press Enter to open the RAID VOLUME

INFO window.

3. Select Delete and press Enter to delete it from the RAID Volumes list.

4. When prompted, select Yes to confirm the deletion of the selected RAID volume.

After you delete the RAID volume, the Intel (R) Rapid Storage Technology window is displayed. Member

drives of the deleted volume are displayed under Non-RAID Physical Disks.

5. Press F10 to save changes and exit.

Reset storage drives to non-RAID

Attention: All the existing data stored on the selected drive will be erased after you reset it to non-RAID.

Chapter 5.Configure advanced settings 33

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenovo ThinkPad T15P Gen 2 - 2021 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lenovo ThinkPad T15P Gen 2 - 2021

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info