Bedienungsanleitung Lenovo ThinkPad T590 (Seite 56 von 128) (Englisch)

718854

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

2. Connect the recovery USB drive to the computer.

3. Turn on or restart the computer. When the logo screen is displayed, press F12. The Boot Menu window

opens.

4. Select the recovery USB drive as the boot device.

5. Click Troubleshoot to display optional recovery solutions.

6. Select a recovery solution as desired. Then, follow the on-screen instructions to complete the process.

Install Windows 10 and drivers

This section provides instructions on installing a Windows 10 operating system and device drivers.

Install a Windows 10 operating system

Microsoft constantly makes updates to the Windows 10 operating system. Before installing a particular

Windows 10 version, check the compatibility list for the Windows version. For details, go to

https://

support.lenovo.com/us/en/solutions/windows-support

Attention:

• It is recommended that you update your operating system through official channels. Any unofficial update

might cause security risks.

• The process of installing a new operating system deletes all the data on your internal storage drive,

including the data stored in a hidden folder.

• For computer models that are installed with hybrid solid-state drive (with Intel Optane memory), ensure

that you do not install the operating system into Optane memory.

1. If you are using the Windows BitLocker Drive Encryption feature and your computer has a Trusted

Platform Module, ensure that you have disabled the feature.

2. Ensure that the security chip is set to Active.

a. Restart the computer. When the logo screen is displayed, press F1 to enter the UEFI BIOS menu.

b. Select Security ➙ Security Chip and press Enter. The Security Chip submenu opens.

c. Ensure that the security chip for TPM 2.0 is set to Active.

d. Press F10 to save the settings and exit.

3. For computer models that are installed with hybrid solid-state drive (with Intel Optane memory), enter

the UEFI BIOS menu and select Config ➙ Storage ➙ Controller mode. Ensure that RST mode is

selected.

4. Connect the drive that contains the operating system installation program to the computer.

5. Restart the computer. When the logo screen is displayed, press F1 to enter the UEFI BIOS menu.

6. Select Startup ➙ Boot to display the Boot Priority Order submenu.

7. Select the drive that contains the operating system installation program, for example, USB HDD. Then,

press Esc.

Attention: After you change the startup sequence, ensure that you select the correct device during a

copy, a save, or a format operation. If you select the wrong device, the data on that device might be

erased or overwritten.

8. Select Restart and ensure that OS Optimized Defaults is enabled. Then, press F10 to save the settings

and exit.

9. Follow the on-screen instructions to install the device drivers and necessary programs.

T490, T590, P43s, and P53s User Guide

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenovo ThinkPad T590 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lenovo ThinkPad T590

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info