729378
13
Zoom out
Zoom in
Vorherige Seite
1/118
Nächste Seite
LevelOne WBR-1101TX User Guide
2. Insert Wireless PCMCIA card
Ensuring the supplied Wireless PCMCIA card is the right way up, insert it into the slot on
the rear. Push it firmly until it clicks into position.
3. Set the ISDN/WAN Push Button
The ISDN/WAN push button is on the rear panel. Ensure it is set correctly:
Depressed (in) - ISDN port is active.
Extended (out) - WAN port is active.
The WAN port and ISDN ports can NOT be used simulta-
neously. The ISDN/WAN push button on the rear panel
determines which port is active.
4. Connect WAN cable OR ISDN cable
If you have a Broadband modem, connect it to the WAN port on the LevelOne WBR-
1101TX. Use the cable supplied with your broadband modem. If no cable was supplied,
use a standard LAN cable.
If using an ISDN connection, connect the ISDN port on the LevelOne WBR-1101TX to
the S/T connector on your ISDN NT1 (Network Terminator 1).
5. Connect LAN Cable
Connect a standard LAN cable from a 10BaseT or 100BaseT Hub on your LAN to the
"HUB" port on the LevelOne WBR-1101TX.
6. Connect Serial Port Modem (optional)
If you wish to use an Analog modem or external ISDN TA, use a standard serial cable to
connect it to the Serial port on the LevelOne WBR-1101TX.
7. Connect Printer Cable
Use a standard parallel printer cable to connect your printer to the Printer port on the Leve-
lOne WBR-1101TX.
8. Power Up
Connect the supplied power adapter and power up.
Use only the power adapter provided.
9. Check the LEDs
The Power LED should be ON.
The Status LED should flash, then turn Off. If it stays on, there is a hardware error.
One (1) of the LAN LEDs (10 or 100) should be ON.
The Wireless LED should be ON.
If the printer is On and On-line, the Print Act LED should be ON.
If using the WAN port, the WAN LED should be ON. (If it is not, check that the Broad-
band modem is connected and ON.)
If using the ISDN port, the ISDN LED should be OFF. It will not come On until a connec-
tion to your ISP is established.
For more information, refer to Front-mounted LEDs in Chapter 1.
10
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für LevelOne WBR-1101TX wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info