Bedienungsanleitung LevelOne WBR-6010 (Seite 6 von 109) (Englisch)

729396

Zoom out

Zoom in

Vorherige Seite

1/109

Nächste Seite

Introduction

 WPA-PSK support. Like WEP, WPA-PSK encrypts any data before transmis-

sion, providing protection against snoopers. The WPA-PSK is a later standard

than WEP, and provides both easier configuration and greater security than WEP.

 WPA2-PSK support. Support for WPA2 is also included. WPA2 uses the

extremely secure AES encryption method.

 802.1x Support. Support for 802.1x mode is included, providing for the indus-

trial-strength wireless security of 802.1x authentication and authorization.

 Wireless MAC Access Control. The Wireless Access Control feature can

check the MAC address (hardware address) of Wireless stations to ensure that

only trusted Wireless Stations can access your LAN.

 Simple Configuration. If the default settings are unsuitable, they can be

changed quickly and easily.

 WPS Support. WPS (Wi-Fi Protected Setup) can simplify the process of con-

necting any device to the wireless network by using the push button configuration

(PBC) on the Wireless Access Point, or entering a PIN code if there's no button.

 WDS Support. Support for WDS (Wireless Distribution System) allows the Wire-

less Access Point to act as a Wireless Bridge. Both Point-to-Point and Multi-Point

Bridge modes are supported.

LAN Features

 4-Port Switching Hub. The Wireless Router incorporates a 4-port

10/100BaseT switching hub, making it easy to create or extend your LAN.

 DHCP Server Support. Dynamic Host Configuration Protocol provides a

dynamic IP address to PCs and other devices upon request. The Wireless Router

can act as a DHCP Server for devices on your local LAN and WLAN.

Configuration & Management

 Easy Setup. Use your WEB browser from anywhere on the LAN or WLAN for

configuration.

 Configuration File Upload/Download. Save (download) the configuration

data from the Wireless Router to your PC, and restore (upload) a previously-saved

configuration file to the Wireless Router.

 Remote Management. The Wireless Router can be managed from any PC on

your LAN or Wireless LAN. And, if the Internet connection exists, it can also (op-

tionally) be configured via the Internet.

 Network Diagnostics. You can use the Wireless Router to perform a Ping or

DNS lookup.

 UPnP Support. UPnP (Universal Plug and Play) allows automatic discovery

and configuration of the Wireless Router. UPnP is supported by Windows ME, XP,

or later.

Security Features

 Password - protected Configuration. Password protection is provided to

prevent unauthorized users from modifying the configuration data and settings.

 Wireless LAN Security. WPA-PSK, WEP and Wireless access control by

MAC address are all supported. The MAC-level access control feature can be

used to prevent unknown wireless stations from accessing your LAN.

 NAT Protection. An intrinsic side effect of NAT (Network Address Translation)

technology is that by allowing all LAN users to share a single IP address, the loca-

tion and even the existence of each PC is hidden. From the external viewpoint,

there is no network, only a single device - the Wireless Router.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

LevelOne WBR-6010 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info