Bedienungsanleitung Lexmark C 790 (Seite 39 von 222) (Englisch)

455727

Zoom out

Zoom in

Vorherige Seite

1/222

Nächste Seite

Order of installation

CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more

trained personnel to lift it safely.

CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must

use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an input

option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and

faxes, you may need additional furniture. For more information, see

www.lexmark.com/multifunctionprinters.

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory

devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the

wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,

and unplug any cables going into the printer.

Install the printer and any options you have purchased in the following order:

• Caster base

• Optional spacer

• Optional 550‑sheet trays or 2,000‑sheet high‑capacity feeder

• Standard 550‑sheet trays

• Printer

For information on installing a caster base, a 550‑ or 2,000‑sheet optional tray, spacer, or any of the finishers, see the

setup documentation that came with the option.

Installing optional trays

The printer supports the following optional input sources:

• 550‑sheet tray

• 2,000‑sheet high‑capacity feeder

CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more

trained personnel to lift it safely.

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory

devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the

wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,

and unplug any cables going into the printer.

CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must

use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an input

option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and

faxes, then you may need additional furniture. For more information, see

www.lexmark.com/multifunctionprinters.

1 Unpack the optional tray, and then remove all packing material.

2 Place the tray near the printer.

3 Turn the printer off.

4 Align the printer with the tray, and then lower the printer into place.

Additional printer setup 39

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lexmark C 790 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lexmark C 790

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info