Bedienungsanleitung Lexmark C520 (Seite 35 von 145) (Englisch)

20466

Zoom out

Zoom in

Vorherige Seite

1/145

Nächste Seite

Media specifications

Media is paper, card stock, transparencies, labels, and envelopes. The last four are sometimes referred to as specialty

media. The printer provides high quality printing on a variety of media. A number of things must be considered concerning

media before printing. This chapter provides information to help make media selections and how to care for media.

Media guidelines

Selecting the appropriate media for the printer helps avoid printing problems.

The following sections contain guidelines for choosing the correct media for the printer.

For detailed information about media characteristics, see the Card Stock & Label Guide available on the Lexmark Web site

at www.lexmark.com/publications.

Paper

To ensure the best print quality and feed reliability, use 90 g/m

(24 lb) xerographic, grain long paper. Business papers

designed for general business use may also provide acceptable print quality.

Always print several samples before buying large quantities of any type of media. When choosing any media, consider the

weight, fiber content, and color.

The laser printing process heats paper to high temperatures of 180°C (356°F) for non-MICR applications. Use only paper

able to withstand these temperatures without discoloring, bleeding, or releasing hazardous emissions. Check with the

manufacturer or vendor to determine whether the paper chosen is acceptable for laser printers.

When loading paper, note the recommended print side on the paper package, and load paper accordingly. See Loading

the standard tray and Loading the optional 500-sheet tray for detailed loading instructions.

Paper characteristics

The following paper characteristics affect print quality and reliability. It is recommended that these guidelines are followed

when evaluating new paper stock.

For detailed information, see the Card Stock & Label Guide available on the Lexmark Web site at www.lexmark.com/

publications.

Weight

The printer can automatically feed paper weights from 60 to 176 g/m

(16 to 47 lb bond) grain long. Paper lighter than

60 g/m

(16 lb) might not be stiff enough to feed properly, causing jams. For best performance, use 90 g/m

(24 lb bond)

grain long paper. To use paper smaller than 182 x 257 mm (7.2 x 10.1 in.), it is recommended that the weight be greater

than or equal to 90 g/m

(24 lb bond).

Curl

Curl is the tendency of media to curve at its edges. Excessive curl can cause paper feeding problems. Curl can occur after

the paper passes through the printer, where it is exposed to high temperatures. Storing paper unwrapped in hot, humid,

cold and dry conditions, even in the trays, can contribute to paper curling prior to printing and can cause feeding problems.

Smoothness

The degree of smoothness of paper directly affects print quality. If the paper is too rough, the toner does not fuse to the

paper properly, resulting in poor print quality. If the paper is too smooth, it can cause paper feeding or print quality issues.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lexmark C520 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lexmark C520

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info