Bedienungsanleitung Lexmark C522 (Seite 36 von 145) (Englisch)

20464

Zoom out

Zoom in

Vorherige Seite

1/145

Nächste Seite

Media guidelines

Media specifications

Smoothness needs to be between 100 and 300 Sheffield points; however, smoothness between 150 and 250 Sheffield

points produces the best print quality.

Moisture content

The amount of moisture in the paper affects both print quality and the ability of the printer to feed the paper properly. Leave

the paper in its original wrapper until it is time to use it. This limits the exposure of the paper to moisture changes that can

degrade its performance.

Condition paper while it is still in the original wrapper. To condition it, store it in the same environment as the printer for 24

to 48 hours before printing to let the paper stabilize in the new conditions. Extend the time several days if the storage or

transportation environment is very different from the printer environment. Thick paper may also require a longer

conditioning period because of the mass of material.

Grain direction

Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long, running the length of the

paper, or grain short, running the width of the paper.

For 60 to 90 g/m

(16 to 24 lb bond) paper, grain long fibers are recommended.

Fiber content

Most high-quality xerographic paper is made from 100% chemically pulped wood. This content provides the paper with a

high degree of stability resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as

cotton possess characteristics that can result in degraded paper handling.

Unacceptable paper

The following papers are not recommended for use with the printer:

• Chemically treated papers used to make copies without carbon paper, also known as carbonless papers,

carbonless copy paper (CCP), or no carbon required (NCR) paper

• Preprinted papers with chemicals that may contaminate the printer

• Preprinted papers that can be affected by the temperature in the printer fuser

• Preprinted papers that require a registration (the precise print location on the page) greater than ±2.3 mm

(±0.09 in.), such as optical character recognition (OCR) forms

In some cases, registration can be adjusted with the software application to successfully print on these forms.

• Coated papers (erasable bond), synthetic papers, thermal papers

• Rough-edged, rough or heavily textured surface papers or curled papers

• Recycled papers containing more than 25% post-consumer waste that do not meet DIN 19 309

• Any paper having a weight less than 60 g/m

(16 lb)

• Multiple-part forms or documents

Selecting paper

Proper paper loading helps prevent jams and ensures trouble-free printing.

To help avoid jams or poor print quality:

• Always use new, undamaged paper.

• Before loading paper, know the recommended print side of the paper. This information is usually indicated on the

paper package.

• Do not use paper that has been cut or trimmed by hand.

• Do not mix media sizes, weights, or types in the same source; mixing results in jams.

• Do not use coated papers unless they are specifically designed for electrophotographic printing.

• Do not forget to change the Paper Size setting when using a source that does not support auto size sensing.

• Do not remove trays while a job is printing or Busy appears on the operator panel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lexmark C522 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lexmark C522

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info