Bedienungsanleitung Lexmark C522 (Seite 103 von 145) (Englisch)

20464

103

Zoom out

Zoom in

Vorherige Seite

1/145

Nächste Seite

Solving color quality problems

103

Troubleshooting

Off, the color is based on the print job information; no color conversion is implemented. The following table identifies which

Color Samples pages to use:

Note: The Color Samples pages are not useful if the software application does not specify colors with RGB

or CMYK combinations. Additionally, certain situations exist where the software application or the

computer operating system adjusts the RGB or CMYK combinations specified in the application

through color management. The resulting printed color may not be an exact match of the Color

Samples pages.

What are Detailed Color Samples and how do I access them?

This information applies to network models only.

Detailed Color Samples are pages similar to the default pages of color samples accessible from the Quality Menu in

Settings on the printer operator panel or from the “Configuration Menu'” in the printer EWS. The default color samples

accessed by these methods have an increment value of 10 percent for Red (R), Green (G), and Blue (B) values.

Collectively, these values are known as RGB color. If the user finds a value on the pages that is close, but would like to scan

more colors in a nearby area, the user can use the Detailed Color Samples to input the desired color value and a more

specific or lower increment value. This lets the user print multiple pages of colored boxes that surround a specific color of

interest.

To access the pages of Detailed Color Samples, use the printer EWS interface. Select the Color Samples option within the

“Configuration Menu.” Nine color conversion table options and three buttons called Print, Detailed, and Reset are shown on

the options screen.

If the user selects a color conversion table and presses the Print button, the printer prints the default color samples pages.

If the user selects a color conversion table and presses the Detailed button, a new interface becomes available. The

interface lets the user enter individual R, G, and B values of the specific color of interest. The user can also enter an

increment value that defines the difference between the RGB value that each color box differs by. If the user selects Print,

a printout generates which consists of the user-specified color and the colors that exist near this color based on the

increment value.

This process can be duplicated for Cyan (C), Magenta (M), Yellow (Y), and Black (K) color conversion tables, too.

Collectively, these values are known as CMYK color. The default increment is 10 percent for Black, and 20 percent for

Color specification of

object being printed

Classification of

object being printed

Printer Color

Correction setting

Color Samples pages to print

and use for color matching

RGB Text Auto sRGB Vivid

Manual Manual Color RGB Text Setting

Graphic Auto sRGB Vivid

Manual Manual Color RGB Graphics Setting

Image Auto sRGB Display

Manual Manual Color RGB Image Setting

CMYK Text Auto US CMYK or EURO CMYK

Manual Manual Color CMYK Text Setting

Graphic Auto US CMYK

Manual Manual Color CMYK Graphics Setting

Image Auto US CMYK

Manual Manual Color CMYK Image Setting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lexmark C522 Seite 103

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lexmark C522

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info