Bedienungsanleitung Lexmark CS317 Series (Seite 168 von 188) (Englisch)

670875

168

Zoom out

Zoom in

Vorherige Seite

1/188

Nächste Seite

Object type Color conversion tables

CMYK Image

CMYK Text

CMYK Graphics

• US CMYK—Applies color correction to approximate the SWOP

(Speciﬁcations

for Web

Oset

Publishing) color output.

• Euro CMYK—Applies color correction to approximate Euroscale

color output.

• Vivid CMYK—Increases the color saturation of the US CMYK

color correction setting.

•

O

—No color correction is implemented.

How can I match a particular color (such as a corporate logo)?

Nine types of Color Samples sets are available from the Quality menu on the printer control panel. These are

also available from the Color Samples page of the Embedded Web Server. Selecting any sample set

generates a multiple‑page printout consisting of hundreds of colored boxes. Either a CMYK or RGB

combination is located on each box, depending on the table selected. The observed color of each box is

obtained by passing the CMYK or RGB combination labeled on the box through the selected color conversion

table.

By examining Color Samples sets, you can identify the box whose color is the closest to the color you want.

The color combination labeled on the box can then be used for modifying the color of the object in a software

program. For more information, see the help information of your operating system.

Note: Manual color correction may be necessary to utilize the selected color conversion table for the

particular object.

Selecting which Color Samples set to use for a particular color‑matching problem depends on the Color

Correction setting being used , the type of object being printed, and how the color of the object is speciﬁed

in the software program. When Color Correction is set to

O,

the color is based on the print job information,

and no color conversion is implemented.

Note: The Color Samples pages are not useful if the software program does not specify colors with RGB or

CMYK combinations. Additionally, certain situations exist in which the software program or the computer

operating system adjusts the RGB or CMYK combinations speciﬁed in the program through color

management. The resulting printed color may not be an exact match of the Color Samples pages.

Prints on color transparencies appear dark when projected

Note: This problem occurs when projecting transparencies with

reﬂective

overhead projectors. To obtain the

highest projected color quality, transmissive overhead projectors are recommended.

Action Yes No

Step 1

From the printer control panel, make sure the paper type setting

is set to Transparency.

Is the paper type setting correct?

Go to step 2. Set the paper type to

Transparency.

Step 2

Reduce the toner darkness, and then resend the print job.

Does the print on the color transparency look lighter?

The problem is

solved.

Go to step 3.

Troubleshooting 168

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lexmark CS317 Series Seite 168

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lexmark CS317 Series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info