612290
60
Zoom out
Zoom in
Vorherige Seite
1/250
Nächste Seite
3 From the printer control panel, navigate to:
> Copy > > Darkness > adjust the darkness setting > select the number of copies or enter a number on the
keypad >
Note: If you want to copy another document, then place it on the scanner glass, press the left or right arrow
button to scroll to Scan the Next Page, and then press
.
4 Press the left or right arrow button to scroll to Finish the Job, and then press .
Adjusting copy quality
1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
The ADF indicator light comes on when the paper is loaded properly.
2 If you are loading a document into the ADF tray, then adjust the paper guides.
3 From the printer control panel, navigate to:
> Copy > > Content Type > select the content type of the original document
4 Press the left or right arrow button to scroll to one of the following:
Text—The content of the original document is mostly text or line art.
Text/Photo—The original document is a mixture of text and graphics or photos.
Photo—The original document is mostly a photo or an image.
Graphics—The original document is mostly businesstype graphics, such as pie charts, bar charts, and
animations.
5 Press the up or down arrow button until Content Source appears, and then press the left or right arrow button
to scroll to one of the following:
Color Laser—The original document was printed using a color laser printer.
Inkjet—The original document was printed using an inkjet printer.
Magazine—The original document is from a magazine.
Press—The original document is from an offset press.
Black/White Laser—The original document was printed using a mono laser printer.
Photo/Film—The original document is a photo from a film.
Newspaper—The original document is from a newspaper.
Other—The original document was printed using an alternate or unknown printer.
Copying 60
60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lexmark CX310 Series wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Lexmark CX310 Series

Lexmark CX310 Series Bedienungsanleitung - Deutsch - 254 seiten

Lexmark CX310 Series Bedienungsanleitung - Holländisch - 245 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info