Bedienungsanleitung Lexmark Intuition S505 (Seite 43 von 148) (Englisch)

612333

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

Printing photos from a digital camera using DPOF

If your camera supports Digital Print Order Format (DPOF), then you can specify which photos to print, how many of

each, and the print settings while the memory card is still in the camera. The printer recognizes these settings when

you insert the memory card into the printer or connect the camera to the printer.

Note: If you specify a photo size while the memory card is still in the camera, then make sure that the size of the paper

loaded in the printer is not smaller than the size you specify in the DPOF selection.

1 Load photo paper.

2 From the printer control panel, press .

3 Insert a memory card.

Memory Card Detected appears on the display.

4 Press the up or down arrow button to scroll to Print Photos, and then press .

5 Press the up or down arrow button to scroll to Print Camera Selections (DPOF), and then press to

print the photos.

Note: This option appears only if a DPOF file is detected in the memory card.

Note: For best results, allow the prints to dry at least 24 hours before stacking, displaying, or storing.

Printing from a Bluetooth-enabled device

• This printer is compliant with Bluetooth Specification 2.0. It supports the following profiles: Object Push Profile

(OPP) and Serial Port Profile (SPP). Check with your Bluetooth-enabled device manufacturers (cellular phone or

PDA) to determine their hardware compatibility and interoperability. It is recommended that you use the latest

firmware on your Bluetooth-enabled device.

• To print Microsoft documents from your Windows Mobile/Pocket PC PDA, additional third-party software and

drivers are required. For more information about the required software, see the documentation for your PDA.

Setting up a connection between your printer and a Bluetooth-enabled device

Note: The printer does not support printing files from your computer using a Bluetooth connection.

You need to set up a connection between a Bluetooth-enabled device and your printer if you are sending a print job

from the Bluetooth device for the first time. You will need to repeat the setup if:

• You reset the printer to its factory default settings.

• You change the Bluetooth security level or the Bluetooth pass key.

• The Bluetooth-enabled device you are using requires users to set up a Bluetooth connection on every print job. For

more information, see the documentation for your Bluetooth device.

• The name of the Bluetooth device you are using is automatically deleted from the Bluetooth device list.

When the Bluetooth security level is set to High, the printer saves a list of up to eight Bluetooth devices that have

previously set up a connection with the printer. When the printer detects more than eight devices, the least recently

used device is removed from the list. You need to repeat the setup of the deleted device to be able to send a print

job to the printer.

Note: You need to set up a connection for each Bluetooth device that you use to send a print job to the printer.

Printing

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lexmark Intuition S505 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lexmark Intuition S505

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info