Bedienungsanleitung Lexmark PRO 202 (Seite 88 von 182) (Englisch)

455567

Zoom out

Zoom in

Vorherige Seite

1/182

Nächste Seite

How do I adjust the speaker volume on the printer?

Listen to the dial tone to check if the telephone line is working and to check if the cables and devices are connected

properly in your telephone network. Make sure that the dialing volume is not set to Off, especially if you are dialing a

number on hook. If you set the printer to receive faxes manually, then make sure that you set the ringer volume loud

enough for you to hear it.

Adjusting the dialing volume

1 From the printer control panel, press .

2 Press the arrow buttons to scroll to Fax Setup, and then press .

3 Press the arrow buttons to scroll to Dialing and Sending, and then press .

4 Press the arrow buttons to scroll to Dial Volume, and then press .

5 Press the arrow buttons to select a dial volume setting, and then press .

Adjusting the ringer volume

1 Press to scroll back to the Fax Setup menu.

2 Press the arrow buttons to scroll to Ringing and Answering, and then press .

3 Press the arrow buttons to scroll to Ringer Volume, and then press .

4 Press the arrow buttons to select a ringer volume setting, and then press .

How can I make sure that fax calls go to the printer and voice calls go to the

answering machine?

To make sure the printer picks up incoming faxes, set Auto Answer to On, and then set the printer to pick up after a

greater number of rings than the answering machine. For example, if the answering machine picks up calls after four

rings, then set the printer to pick up after six rings. This way, the answering machine picks up calls first and your voice

calls are received. If the call is a fax, then the printer detects the fax signal on the line and takes over the call.

What settings work best with digital voice mail?

Voice mail and fax can share the same telephone line if you subscribe to a distinctive ring service. This feature allows

you to have multiple telephone numbers on one telephone line. Each telephone number has a designated ring pattern

(a single ring, a double ring, a triple ring). The different ring patterns let you know which telephone number was dialed,

and which device you should use to answer the call.

If you do not have distinctive ring service, then set the printer to receive faxes manually (Auto Answer Off). This setting

lets you receive both voice calls and fax calls, but works best if you use voice mail more often. You need to turn off

voice mail whenever you are expecting a fax.

How do I change the resolution of the documents that I fax?

The resolution, or fax quality, of the documents that you send may affect fax transmission. The receiving fax machine

may not support high resolutions and may not be able to receive your fax. You can fix this by enabling Auto Fax

Conversion, but the automatic conversion may result in an unreadable fax, especially if the original document is already

blurred.

Faxing

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lexmark PRO 202 Seite 88

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lexmark PRO 202

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info