Bedienungsanleitung Lexmark Pro 915 (Seite 89 von 200) (Englisch)

612376

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

For Macintosh users

From the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder.

b Double-click Printer Settings, and then configure the fax settings.

What is a splitter and what type of splitter should I use?

If there are limited wall jacks in your home or limited ports on your adapter, then you can use a phone splitter. A splitter

splits the telephone signal and allows you to connect multiple devices to the wall jack. It has two or more ports where

you can plug the devices. Do not use a line splitter.

To make sure that you are using the correct splitter, plug an analog telephone into the splitter and then listen for a dial

tone.

What is my fax number?

In most cases, your telephone number is also your fax number. If you subscribe to the Distinctive Ring Pattern Detection

(DRPD) service offered by telephone companies, then your fax number is the number that you assigned to the printer.

Make sure that you enter the correct distinctive ring pattern for that number in the fax software or in the Fax Setup

menu of the printer control panel.

If you have more than one telephone line, then make sure that you enter the number for the line on which the printer

is connected.

What is my dialing prefix?

The dialing prefix is the number or series of numbers that you press before you can dial the actual fax number or

telephone number. If the printer is in an office setting or in a private branch exchange, then this can be a specific number

that you need to press so you can make a call outside the office. This can also be a country code or an area code that

you need to enter if you are sending faxes outside of town. This can be very useful if you frequently send faxes to the

same country or area. When you set the dialing prefix in the utility, the printer automatically inputs the prefix when

you dial the fax number or telephone number.

You can enter up to 8 characters as your dialing prefix. The valid characters are the numbers 0–9, the letters P and W

(uppercase and lowercase), and the characters pound (#) and star (*). If you are using the fax software to enter the dial

prefix, then you may also include the characters minus and comma.

Notes:

• Some of these characters may not be available, depending on the printer you purchased.

• Characters may vary depending on whether you are using the printer control panel or the computer keyboard.

When do I need to set Auto Answer to On?

Auto Answer is set to On by default, which lets the printer receive faxes automatically.

If the printer is connected to the same telephone line with an answering machine, then you must set Auto Answer to

On so that you can receive both your voice calls and your faxes. Make sure that the answering machine is set to pick

up on fewer rings than the rings set in the printer. This lets the other devices pick up the voice calls first. If an incoming

call is a fax, the printer can detect fax signals on the line and takes the call.

Faxing 89

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lexmark Pro 915 Seite 89

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lexmark Pro 915

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info