Bedienungsanleitung Lexmark Pro715 (Seite 165 von 197) (Englisch)

612374

165

Zoom out

Zoom in

Vorherige Seite

1/197

Nächste Seite

If your access point is using WPA or WPA2 security, then the WPA passphrase should be:

• Exactly 64 hexadecimal characters. Hexadecimal characters are A–F, a–f, and 0–9.

• From 8 to 63 ASCII characters. ASCII characters are letters, numbers, and symbols found on a keyboard. ASCII

characters in a WPA passphrase are case‑sensitive.

Note: If you do not know this information, then see the documentation that came with the access point, or

contact your system support person.

CHECK IF YOUR ACCESS POINT HAS AN ASSOCIATION/REGISTRATION BUTTON

Wireless broadband boxes in Europe, the Middle East, and Africa such as LiveBox, AliceBox, N9UF Box, FreeBox, or

Club Internet may require you to press an association/registration button when adding the printer to your wireless

network.

If you are using one of these boxes and need more information, then see the documentation that came with your

box, or contact your Internet Service Provider (ISP).

MOVE YOUR ACCESS POINT AWAY FROM OTHER ELECTRONIC DEVICES

There may be temporary interference from electronic devices such as microwave ovens or other appliances, cordless

phones, baby monitors, and security system cameras. Make sure your access point is not positioned too closely to

these devices.

MOVE THE COMPUTER AND/OR PRINTER CLOSER TO THE ACCESS POINT

The range of your wireless network depends on many factors, including the abilities of your access point and network

adapters. If you are having trouble printing, then try placing the computer and printer no more than 100 feet apart.

CHECK THE WIRELESS SIGNAL QUALITY

Print a network setup page and check the signal quality. If the signal quality is listed as good or excellent, then another

factor is causing the problem.

CHECK YOUR ADVANCED SECURITY SETTINGS

• If you are using MAC (Media Access Control) address filtering to limit access to your wireless network, then you

must add the printer MAC address to the list of addresses allowed to connect to the access point.

• If you set the access point to issue a limited number of IP addresses, then you must change this so that the printer

can be added.

Note:

If you do not know how to make these changes, then see the documentation that came with the access

point, or contact the person who set up your wireless network.

MAKE SURE YOUR COMPUTER IS CONNECTED TO YOUR ACCESS POINT

•

See if you have access to the Internet by opening your Web browser and accessing any site.

•

If there are other computers or resources on your wireless network, then check to see if you can access them

from your computer.

MAKE SURE THAT YOUR COMPUTER AND PRINTER ARE CONNECTED TO THE SAME WIRELESS NETWORK

If the printer is not on the same wireless network as the computer, then you will not be able to print wirelessly. The

SSID of the printer must match the SSID of the computer, if the computer is already connected to the wireless network.

Troubleshooting 165

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lexmark Pro715 Seite 165

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lexmark Pro715

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info