Bedienungsanleitung Lexmark Pro715 (Seite 170 von 197) (Englisch)

612374

170

Zoom out

Zoom in

Vorherige Seite

1/197

Nächste Seite

ELIMINATE NETWORK CONGESTION

If a wireless network is too busy, then the computer and printer may have difficulty communicating with each other.

Some causes of wireless network congestion can include:

• Transferring large files across the network

•

Networked games

•

Peer‑to‑peer file swapping applications

• Streaming video

• Too many computers on the wireless network at once

ELIMINATE SOURCES OF INTERFERENCE

Common household items can potentially disrupt wireless network communications. Cordless phones (but not

cellular phones), microwave ovens, baby monitors, almost any kitchen appliance, wireless surveillance equipment,

nearby wireless networks, and any appliance containing a motor can disrupt wireless network communications.

Try turning on any potential sources of interference and see if it causes the problem. If it does, then separate your

wireless network from the device.

CHANGE THE CHANNEL THE ACCESS POINT USES

You can sometimes eliminate interference from unknown sources by changing the channel your access point uses

to broadcast. There are three distinct channels on a router. See the documentation that came with your router to

determine which three apply. Other channels are offered as options, but these overlap. If the router is configured

to use the default settings, then change the channel setting to use a different distinct channel. If you are not sure

how to change the channel, then see the documentation that came with your access point.

CONFIGURE THE ACCESS POINT WITH A UNIQUE SSID

Many wireless networks use the SSID that the router was originally configured by the manufacturer to use. Using

the default SSID can cause problems when more than one network is operating in the same area with the same SSID.

The printer or computer may attempt to attach to the wrong network, although it will appear to be trying to connect

to the correct network.

To avoid this type of interference, change the SSID on your access point from the default. If you are not sure how to

change the SSID, then see the documentation that came with your access point.

Note:

You must change the SSID on all of the other devices that access your wireless network if you change the

SSID on the access point.

ASSIGN STATIC IP ADDRESSES TO ALL DEVICES IN THE NETWORK

Most wireless networks use a DHCP server (Dynamic Host Configuration Protocol) built in to the wireless router to

assign IP addresses to clients on the wireless network. DHCP addresses are assigned when they are needed, as when

a new device is added to the wireless network or when it is powered on. Wireless devices must send a request to

the router, and receive an IP address in response so they can function on the network. Because the wireless router

performs many other tasks besides assigning addresses, it sometimes does not respond quickly enough with an

address. The requesting device sometimes gives up before it receives an address.

Try assigning static IP addresses to the devices in your network to resolve this issue.

Troubleshooting 170

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lexmark Pro715 Seite 170

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lexmark Pro715

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info