Bedienungsanleitung Lexmark Pro715 (Seite 27 von 55) (Englisch)

612374

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

Scanning

ADF Scanner glass

Use the ADF for multiple‑page documents.

Note: The ADF is available only on select models. If

you purchased a printer without an ADF, then load

original documents or photos on the scanner glass.

Use the scanner glass for single pages, small items

(such as postcards or photos), transparencies, photo

paper, or thin media (such as magazine clippings).

Tips for scanning

• Use the scanner glass when scanning two‑sided pages if your printer does not support duplex scanning

or the ADF does not support the original document size.

• When using the ADF, adjust the paper guide on the ADF to the width of the original document.

• When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned

image.

• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as

magazine clippings) into the ADF. Place these items on the scanner glass.

• When the document to be scanned is in place with the settings you want, press to start scanning.

Scanning to a local computer

1 Load the original document faceup into the ADF or facedown on the scanner glass.

2 From the printer control panel, navigate to:

> Scan > > Computer > USB‑Connected Computer >

The USB‑connected computer will receive the scan by default.

Note: Make sure the scan software is installed on the destination computer.

3 Press the up or down arrow button to scroll to the scan option you want to set, and then press the

left or right arrow button to scroll to the setting you want.

Set the color, quality, original image size, and other scan options. If necessary, press

each time

you make a selection.

4 Press .

Scanning to a flash drive or memory card

Notes:

• Some features are available only in select printer models.

• Make sure your flash drive or memory card is not write‑protected.

1 Load the original document faceup into the ADF or facedown on the scanner glass.

2 From the printer control panel navigate to:

> Scan > > Memory Device

3 Insert the flash drive or memory card, and then press .

Note: The printer reads only one memory device at a time.

4 Press the up or down arrow button to scroll to the scan option you want to set, and then press the

left or right arrow button to scroll to the setting you want.

Set the color, quality, original image size, and other scan options. If necessary, press

each time

you make a selection.

5 Press .

Follow the instructions on the printer display.

Scanning directly to e‑mail using the printer software

Make sure you have set up your e‑mail settings before proceeding. For more information, see the section

on e‑mailing in the User’s Guide.

For Windows users

1 Load an original document faceup into the ADF or facedown on the scanner glass.

Scanning 27

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lexmark Pro715 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lexmark Pro715

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info